Fine Decor Wood Slats Wallpaper - Brown

Currently unavailable

Currently unavailable
This Yöl Dark Wood Slat Effect Wallpaper in Brown is ideal for homeowners looking to add a modern, natural aesthetic to their living spaces. Its key benefit is the realistic wood slat design on a smooth paper finish, creating a striking feature wall with ease. A caveat to consider is the specific application method, which requires pasting the paper.
| Colour | Brown |
|---|---|
| Brand | YöL |
Each roll measures 10 meters in length and 0.53 meters in width, covering approximately 5.2 square meters (57 sq.ft).
This wallpaper uses the 'paste the paper' application method. You apply the wallpaper paste directly to the back of the wallpaper strip.
Yes, the wallpaper is classified as washable. You can gently wipe it with a damp cloth or sponge to clean minor marks.
The pattern repeat is 53cm with a straight match, meaning you align the pattern on consecutive strips every 53cm.
It is generally best to remove old wallpaper before applying new wallpaper to ensure proper adhesion and a smooth finish. However, if the existing wallpaper is sound and well-adhered, this paper might be applied over it, but results may vary.
Good light fastness means the wallpaper has a high resistance to fading when exposed to sunlight over time, helping to maintain its color and appearance.
Strippable wallpaper can be removed from the wall in large pieces, often in a dry state, without requiring excessive soaking or steaming, making redecoration easier.
Ensure the paste is applied evenly and book the paper correctly. Use a wallpaper brush or smoothing tool to gently push air towards the edges as you hang the strip. If bubbles persist after drying, a pinprick may allow air to escape, but this is best avoided with careful application.
Double-check that you are using a straight match and that the pattern on consecutive strips is aligned precisely. Ensure the first strip is hung perfectly plumb (vertical) as all subsequent strips will follow from it.
Verify that the wall surface is clean, dry, and suitably prepared. Ensure the correct type and amount of wallpaper paste have been used and applied evenly to the paper.
Ensure all rolls used for the same area are from the same batch. While color variation is rare, it can occur. If noticeable, contact the retailer with batch numbers from the rolls.
Setup: This wallpaper uses the 'paste the paper' application method. Ensure the wall surface is clean, dry, and free from dust or old wallpaper. Prepare your paste according to the manufacturer's instructions. Apply the paste evenly to the back of the wallpaper strip, allowing it to 'book' (sit for a few minutes) as per the paste instructions before hanging. Use a wallpaper brush or smooth roller to apply strips, working from the center outwards to remove air bubbles.
Compatibility: Suitable for most interior walls. Ensure the wall surface is sound and properly prepared. Not recommended for areas with excessive moisture or direct water contact.
Care: This wallpaper is classified as washable. For general cleaning, use a slightly damp cloth or sponge. Avoid harsh chemicals or abrasive cleaners, as these can damage the print and finish. For stubborn marks, gently wipe with a mild soap and water solution, then rinse with a clean damp cloth. Due to its strippable nature, removal should be straightforward when needed.