Cheshire Mouldings Smooth Planed Pine Stripwood - (L)0.9M (W)15mm (T)6mm

Use a fine-toothed saw for the cleanest cuts. A mitre saw or hand saw will work well.

While the wood itself is suitable, it's essential to apply an exterior-grade finish to protect it from the elements.

The best finish depends on your project. Paint, stain, varnish, or sealant can all be used, depending on the desired look and level of protection required.

You can use wood glue, nails, or screws. Pre-drilling pilot holes is recommended, especially near the edges of the wood, to prevent splitting.

Yes, the wood is smooth planed, but you may want to lightly sand it before applying a finish for the best results.

It is ideal for projects like building shelves, picture rails, decorative moldings, and various craft projects.

Use a pilot hole before inserting screws or nails. Use a finer-toothed saw blade when cutting.

Ensure the wood surface is clean, dry, and properly prepared with primer if required. Sand the surface lightly before applying the finish.

Ensure the wood is stored in a stable environment before use. Use proper support and bracing during installation.