Best current price£99.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£99.50Visit shop B&Q - Ht High Temperature Silver Satin Bbq & Stove Paint 5Ltr
Visit shop2 offers from £99.50
View price history by clicking the chart icon.
The Guard HT Silicone Heat Resistant Paint in Silver is designed for DIYers and professionals looking to protect and decorate metal surfaces subjected to high temperatures. Its key benefit is providing a durable, heat-resistant coating that can withstand up to 600°C, preventing rust and enhancing appearance. A potential caveat is the need for a specific thinner for application, which must be purchased separately.
| Colour | Silver |
|---|---|
| Brand | Guard |
The Guard HT Silicone Heat Resistant Paint can withstand temperatures up to 600°C (1112°F).
This paint is primarily designed for ferrous metal surfaces. Compatibility with other metals may vary and testing in an inconspicuous area is recommended.
The surface must be clean, dry, and free from rust, grease, oil, and old paint. Light sanding and degreasing are often necessary.
Yes, Guard Solvent A is the recommended thinner for this product, especially when spray application is desired.
Drying times vary. Typically, recoating is possible after 1-2 hours, but refer to the product's specific instructions for detailed drying and curing times, as curing often requires exposure to heat.
Yes, it is suitable for interior and exterior use on BBQ surfaces that experience high temperatures.
Coverage rates can vary based on the application method and surface porosity. Please refer to the product packaging or technical data sheet for specific coverage information.
Ensure the metal surface was thoroughly cleaned, degreased, and free from rust or old paint before application. Proper surface preparation is crucial.
Apply thinner coats. If spraying, ensure the correct thinner is used and applied at the recommended pressure and distance. For brushing, use a high-quality brush and apply smoothly.
Verify that the paint was fully cured by gradually exposing it to heat as per the instructions. Ensure the maximum temperature limit of 600°C is not exceeded.
Dilute with the recommended thinner (Guard Solvent A) sparingly, following the product's dilution guidelines. Over-thinning can compromise performance.
Setup:
Compatibility:
Care:
