Husqvarna Saw Chain X-Cut C85 20" 3/8" 1.5mm

The primary benefit is its combination of fast, efficient cutting and outstanding durability, designed for professional users to maximize productivity and minimize downtime.

This 20-inch chain is compatible with Husqvarna models 592XP, 592XPG, 562XP, 562XPG, 390XP, 565, 585, and 572XP.

Sharpening frequency depends on usage and wood type. A general rule is to sharpen when you notice a decrease in cutting speed or efficiency, or if the chain starts to 'wander'.

A full chisel chain has square-cornered cutters, offering aggressive and fast cutting performance, ideal for professional use in felling and bucking.

While it will perform, this chain is optimized for professional, full-time use. For occasional home use, a less aggressive chain might be more appropriate and easier to maintain.

Regular maintenance includes ensuring proper lubrication, maintaining correct chain tension, and sharpening the cutters as needed. Keeping the chain and bar clean also extends its life.

This is a 3/8" pitch chain with a 1.5 mm (0.058") gauge.

Check if the chain is dull and needs sharpening. Verify correct chain tension and ensure the bar groove is clean and lubricated.

Ensure the automatic oiler is working correctly. Re-tension the chain and check for any damage or wear on the chain and drive sprocket.

Check chain tension – it may be too loose. Inspect the guide bar for wear or damage and ensure the drive sprocket is not worn.

Clean sawdust and debris from the bar groove and around the drive sprocket. Ensure adequate lubrication is being applied.