D-Line Trunking Flat Bends Mini - FLFB3015
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone using D-Line 30x15mm Mini trunking who needs to make 90-degree bends on flat surfaces. The D-Line Flat Bends Mini (FLFB3015) offer a clean and professional finish to your trunking installations, forgiving imperfect cuts. However, ensure accurate measurements for the best aesthetic results.
All features
| Model Part Number | FLFB3015 |
|---|---|
| Brand | D-Line |
Extended Product Information
FAQs
What size trunking is compatible with these bends?
These flat bends are designed specifically for D-Line 30x15mm Mini trunking.
How do I install the flat bends?
Simply clip the bend over the cut ends of the trunking to create a 90-degree turn.
Are these bends reusable?
Yes, the bends can be removed and reused if necessary.
Can I use these bends on curved surfaces?
No, these bends are designed for use on flat surfaces only.
What material are these bends made from?
The material is not specified, but it's likely a durable plastic suitable for electrical installations.
What is included in the package?
The product is supplied in a pack of five flat bends.
Do I need any special tools for installation?
You may need a saw or cutter to cut the trunking and possibly fixings, but the bends themselves clip on without tools.
Troubleshooting
Bend doesn't fit the trunking.
Ensure you are using the correct size trunking (30x15mm Mini) and that the bend is properly aligned.
Bend is loose or unstable.
Check that the rear grip tabs are securely attached to the trunking. If necessary, use adhesive or fixings to reinforce the connection.
Pros and Cons
Pros
- Quick and easy installation process.
- Forgiving design that accommodates for imprecise cuts.
- Provides a professional and finished look to trunking.
- Secure fit with rear grip tabs.
- Specifically designed for D-Line 30x15mm Mini trunking.
Cons
- Requires D-Line 30x15mm Mini trunking.
- Aesthetics may be compromised if used with incompatible trunking.
- Not suitable for bends other than 90 degrees.
- Limited to flat surface applications.
Setup, Compatibility & Care
Setup
- Ensure you have D-Line 30x15mm Mini trunking and the Flat Bends Mini.
- Measure and cut the trunking to the required lengths.
- Position the flat bend at the corner or bend location.
- Clip the flat bend over the trunking sections.
- Secure the trunking with appropriate fixings.
Compatibility
These flat bends are exclusively compatible with D-Line 30x15mm Mini trunking.
Care
- Wipe clean with a damp cloth.
- Avoid using abrasive cleaners or solvents.
- Regularly inspect the installation for any damage or disconnections.