Best current price£18.70from The Range
Shopping.co.uk recommended and popular offers
The Range£18.70Visit shop Jcp Fixings Ring Hdg Clipped Head Drivefast Nails Only Ce - 63 X 2.8Mm (Box Of 1000) - Red
Visit shop13 offers from £18.70 - £57.76
View price history by clicking the chart icon.
The JCP Fixings Ring HDG Clipped Head Drivefast Nails are designed for professional contractors and serious DIYers who require high-strength, reliable fastening for wood construction projects. Featuring a ring shank design and hot-dip galvanized finish, these nails offer superior holding power and long-term corrosion resistance, though they are specifically engineered for use in compatible gas and powder-actuated nailers, meaning they are not suitable for manual hammer installation.
| Colour | Red |
|---|---|
| Model Part Number | 5014196753218 |
| Brand | JCP Fixings |
Yes, the hot-dip galvanized coating provides sufficient protection for use with most pressure-treated wood.
No, these are collated nails designed exclusively for use in compatible framing nailers.
The rings act like barbs, making the nail much harder to pull out once driven into the wood compared to smooth nails.
They are highly corrosion-resistant due to the hot-dip galvanization, but they are not classified as stainless steel and may show wear in extreme marine environments.
They are designed for standard clipped-head gas or powder-actuated nailers; please check your tool's manual for specific fastener requirements.
Check that the nail strip is properly seated and that there is no debris in the guide channel.
Adjust the depth control settings on your nailer or verify that the gas cartridge has sufficient pressure.
Ensure the nailer is held at a 90-degree angle and verify that you are not nailing too close to the edge of the board.
Before starting, ensure your nailer is compatible with clipped head nails rather than full-head nails, as this affects magazine seating. To maintain performance, store the nails in a dry environment to prevent premature degradation of the protective coating. When loading the tool, inspect the strip collation for any damage during shipping to ensure smooth feeding. If you notice the tool misfiring, verify that the air pressure or gas charge is set correctly for the wood density you are working with, as this ensures the nail is seated flush with the surface.
