CT1 Adhesive & Sealant - Brown - Oak

Yes, CT1 Adhesive & Sealant can be applied and will cure effectively underwater and in all saltwater environments.

Yes, CT1 is overpaintable. Ensure it is fully cured before applying paint for best results.

CT1 provides unique adhesion on virtually any material, including metals, plastics, wood, glass, concrete, and more, without additional fixings.

No, CT1 is formulated to be flexible and does not shrink after curing, which helps maintain a reliable seal.

Yes, CT1 is suitable for both interior and exterior use due to its excellent resistance to chemicals, UV radiation, and weathering.

CT1 becomes tack-free within 1-2 hours, and fully cures within 24-48 hours, depending on temperature and humidity.

This variant is 'Oak' colored, which is a shade of brown.

Ensure surfaces were properly cleaned, dried, and free from dust, grease, or loose paint. Reapply after cleaning and preparing surfaces thoroughly.

Check environmental conditions (temperature and humidity). Ensure adequate ventilation. If applied too thickly in very cold conditions, curing may be delayed.

Practice applying to a scrap surface to get a feel for the pressure needed. Use masking tape along the joint lines for a cleaner finish. Smooth the bead with a wet finger or smoothing tool immediately after application.

Ensure the nozzle is cut correctly. Check if the internal seal has been fully pierced. Warm the cartridge slightly in a bucket of warm water if working in cold temperatures.