BirdDog O4 4K60 Outdoor PTZ Camera - Grey

The camera is designed for year-round operation due to its built-in heater and robust construction. Specific temperature ranges can be found in the detailed technical specifications, but it is engineered to withstand typical outdoor environmental extremes.

Yes, the BirdDog O4 is NDI 6.2-ready, ensuring compatibility with the latest NDI standards and protocols.

The camera supports PoE++ (802.3bt) for a single-cable network and power solution. It can also be powered via a DC power input.

The camera features 500 meters of infrared night vision, allowing for clear imaging in complete darkness over significant distances.

Yes, the camera can be controlled remotely via its web interface, NDI control protocols, or compatible PTZ control software.

An IP66 rating indicates that the camera is protected against dust ingress (the '6' first digit) and protected against strong jets of water (the '6' second digit), making it suitable for outdoor environments.

For routine cleaning, use a soft, lint-free microfiber cloth. If necessary, a lens cleaning solution can be applied sparingly to the cloth. The hydrophobic coating helps repel water, but periodic cleaning ensures optimal clarity.

Ensure the PoE++ switch is providing sufficient power or that the DC power adapter is correctly connected and functioning. Verify the power cable integrity.

Check that the output resolution and frame rate are supported by your display or capture device. Ensure the cable is securely connected at both ends.

Verify the camera is connected to the network and has a valid IP address. Ensure the NDI discovery service is enabled on the camera and your NDI-compatible software. Check firewall settings.

Ensure the camera has a clear view of the subject. Check for obstructions or rapidly changing lighting conditions. Review and adjust autotracking sensitivity settings in the web interface.

Ensure the infrared night vision is enabled if in complete darkness. Check aperture and exposure settings. For moderate low light, the 1/1.8” sensor should provide good performance; verify no obstructions are affecting the lens.