eufy Robot Vacuum Cleaner - Omni C28 - Black

The HydroJet™ mop cleans itself in real-time during cleaning cycles and also undergoes a full wash cycle when the robot returns to the 5-in-1 station.

It is recommended to only use water or eufy-approved cleaning solutions in the clean water tank. Using other liquids may damage the system or affect cleaning performance.

Battery life varies depending on the cleaning mode and floor type, but the robot is designed to cover large areas on a single charge and will automatically return to the station to recharge if needed.

The DuoSpiral brushes are designed with a specific structure and rotation pattern that helps to minimize hair and fur entanglement, automatically feeding debris towards the dustbin.

No, the iPath 2.0 navigation creates a map of your home. This map is saved in the eufy Home app, and the robot uses it for efficient cleaning on subsequent runs. You can edit or re-map if changes occur.

The 5-in-1 station collects wastewater from the mop washing process into a dedicated wastewater tank, which you will need to empty periodically.

Regularly empty and clean the clean and wastewater tanks. Replace the dust bag in the auto-empty dustbin when indicated by the app. Keep the station's charging contacts and sensors clean.

Ensure the station is powered on and has clear space around it. Check if the robot's charging contacts and the station's contacts are clean. Manually place the robot on the charger to see if it initiates charging.

Verify that the clean water tank is filled and the wastewater tank is not full. Ensure the mop pad is correctly attached and clean. Check the app settings to confirm the mop wetting level is appropriate for the floor type.

Check the robot's path for new obstacles or changes in furniture layout. Clean the iPath 2.0 sensors on the robot. Ensure the app's map accurately reflects the room layout and consider setting up 'no-go' zones if specific areas are problematic.

Ensure the dustbin is not full and the dust bag in the station is replaced if applicable. Check the robot's main brush and side brushes for any blockages or debris. Clean any visible air intake obstructions.

Restart your router and the robot vacuum. Ensure you are connecting to a 2.4GHz network. If issues persist, try resetting the robot's network settings via the app or its physical buttons and re-attempt setup.