Best current price£18.93from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.93Visit shop B&Q - Heavy Duty Post Support 71 X 71 X 900 mm Hot Dip Galvanised Fence Holder Anchor Spike Ground Sleeve
Visit shop10 offers from £18.93 - £23.06
View price history by clicking the chart icon.
The Gezu Impex post support spike is an essential tool for homeowners and landscapers looking to install privacy fences or garden structures up to 1.50 meters in height. This robust ground anchor offers a stable, reliable foundation in loose soil, allowing for efficient post installation without the need for concrete; however, it is specifically optimized for lighter horticultural projects and may not be suitable for tall, heavy-duty privacy walls exceeding the recommended height.
| Colour | Grey |
|---|---|
| Brand | Gezu Impex |
No, this product is specifically rated for fences up to 1.50 meters in height.
No, this is a spike-based system designed to provide stability without the need for concrete.
This support is designed for 101 x 101 mm square posts.
The post support is engineered for outdoor use and weather resistance, though routine inspection is recommended.
The spike should be hammered until the base socket is flush with the ground level.
Yes, but be aware that removing it may disturb the soil, which could affect the stability of the next installation point.
Remove the spike immediately, fill the hole with soil, and restart the process while using a spirit level to check alignment after every few strikes.
Ensure you are using the correct size post (101x101 mm) and that the wood construction screws are fully tightened through the pre-drilled holes.
The ground may be too compacted or rocky. Use a digger bar or water the area to soften the soil before attempting to insert the spike again.
For optimal setup, ensure the ground is soft enough to accept the spike. Use a spirit level during installation to guarantee a perfectly vertical post. This support is compatible with square timber posts measuring 101 x 101 mm. For maintenance, periodically check the wood screws for tightness and inspect the base for any signs of soil erosion around the spike. If the fence experiences high winds, consider checking the tightness of the ground grip annually. The grey powder-coated or treated surface is designed to resist rust, but touch-up paint can be applied if the finish is scratched during the hammering process.
DeWalt Flat Chisel - 250 x 20mm Steel - DT6802-QZFrom £10
Pilot Frixion Ballpoint Pen - Gray - LFBT-3SUF-GYFrom £40
Railway Sleeper Bracket - Corner Bracket - 435 x 90 x 45mmFrom £5
DeWalt SDS Plus Hammer Drill Gouge Chisel - 22mmFrom £15
Gypframe Steel C Stud - 3mFrom £16
FloPlast White Polyvinyl Chloride (Pvc) Edge Trim - 2.5MFrom £5
Toolzone 15" 380mm 3/8" Drive Flexi Knuckle Breaker Bar - CRV STEELFrom £9
KCT Rotary Airer Ground Spike Kit - Grey - 32mm/40mmFrom £8
Forgefix Oval Lost Head Nail - 65mm - Silver - 500NLOH65BFrom £2
Gypframe Gyplyner Steel Lining Track, (L)2.9MFrom £9
Bosch SDS-Plus Hammer Drill Bit Flat Chisel - 2 608 690 144From £11
Wednesbury Copper Tube - 15mm x 2mFrom £18