Atlas Double Bed - Cream

The Atlas Double Bed is designed to accommodate UK standard double size mattresses only.

The maximum weight load for the double size Atlas bed frame is 250 kg (approximately 550 lbs).

Yes, the Atlas Double Bed frame requires home assembly. Detailed instructions and all necessary fixings are provided.

You can clean the epoxy powder-coated finish with a soft, damp cloth and mild soap. Avoid using abrasive cleaners or harsh chemicals to prevent damage to the finish.

The bed frame is constructed from robust steel with an epoxy powder-coated cream finish, complemented by antique brass finials.

While the sprung slatted base is designed to work well with most mattress types, it is optimized for UK standard sizes. Always check your mattress manufacturer's recommendations for slat requirements to ensure compatibility and warranty coverage.

Squeaking often results from loose connections. Systematically check and tighten all bolts, screws, and fittings on the frame. If squeaking persists, a small amount of silicone lubricant or petroleum jelly applied to the metal-on-metal contact points or inside the slat caps can help.

Ensure you have read the assembly manual thoroughly and identified all parts before starting. Verify that each component is oriented correctly according to the diagrams. If a part doesn't seem to fit, double-check its designated position. Do not force parts; re-examine the instructions or contact customer support if you suspect a manufacturing defect.

Confirm that each sprung slat is correctly seated within its plastic holder on the side rails. Ensure all slat caps are fully engaged with the frame. If a slat appears damaged, it may need to be replaced. Evenly distribute the slats if any appear bunched together.

This is typically due to incomplete or loose assembly. Re-check all frame connections, especially those at the headboard, footboard, and side rails. Ensure all bolts are tightened securely. The bed should be on a flat, level surface.