Best current price£6.70from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£6.70Visit shop Ronseal 30608 Quick Drying Woodstain Satin Deep Mahogany 250Ml
Visit shop
wilko£12.99Visit shop Ronseal Dark Oak Satin Wood Stain - Quick Drying - 250ml
Visit shop
Debenhams£14.74Visit shop Ronseal Unisex Dark Oak Woodstain Quick Dry Satin 250Ml
Visit shop112 offers from £6.70 - £39.60
View price history by clicking the chart icon.
The Ronseal 10 Year Woodstain in Antique Pine is designed for homeowners seeking long-lasting weather protection for smooth planed exterior wood. Its key benefit is providing a decade of protection without the need for primers or base coats, resisting flaking and peeling. However, it is not suitable for use on decking. This product offers a comprehensive solution for maintaining the appearance and integrity of wooden structures outdoors.
| Colour | Brown |
|---|---|
| Model Part Number | 38687 |
| Brand | Ronseal |
The Ronseal 10 Year Woodstain offers up to 10 years of protection against weathering when applied correctly.
No, this product is not suitable for use on decking. It is designed for smooth planed exterior wood like sheds, fences, and window frames.
No, a primer or base coat is not required with this woodstain. It can be applied directly to smooth planed exterior wood.
The woodstain dries in approximately 1 hour, allowing for recoating relatively quickly.
One litre of this woodstain covers approximately 18m², meaning a 2.5L tin covers approximately 45m².
It is suitable for all smooth planed exterior wood surfaces.
Ensure the product is thoroughly stirred before use and apply in thin, even coats using a good quality brush. Allow adequate drying time between coats.
Ensure adequate coats have been applied. Two coats are recommended for full coverage and protection. Allow sufficient drying time between coats.
This can occur if the surface was not properly prepared or if the product was applied to unsuitable wood. Ensure the wood is smooth, planed, and clean. For existing issues, remove all loose material before re-applying.
Ensure the product was thoroughly stirred before application. Apply coats evenly, avoiding over-application in some areas and under-application in others. Maintain a consistent brush stroke.
Preparation: Ensure the exterior wood surface is clean, dry, and free from dust, grease, and any previous loose coatings. For best results, lightly sand any previously painted or varnished surfaces to ensure good adhesion. Always test on an inconspicuous area first.
Compatibility: This woodstain is suitable for all smooth planed exterior wood. It is not suitable for decking or use on previously treated wood that is flaking or peeling without proper preparation.
Application: Stir the product thoroughly before use. Apply evenly with a brush. Two coats are recommended for optimal protection. Allow 1 hour between coats and for the surface to dry.
Care: Clean application tools with water immediately after use. For ongoing care, wipe down the stained surface with a damp cloth as needed. Avoid abrasive cleaners.
