Regatta Waterproof Jacket - Polka Dot - XXXL

Hydrafort fabric is designed to provide a waterproof and windproof barrier, protecting the wearer from the elements while allowing some breathability.

A 3-in-1 jacket typically consists of an outer shell and a removable inner jacket (often fleece). Ensure both components are present and can be attached or detached as intended by the design.

No, it is not recommended to use fabric softener as it can degrade the waterproof and breathable properties of the fabric and potentially damage taped seams.

Peached fabric has been treated to create a soft, velvety texture, similar to the skin of a peach, enhancing comfort and feel against the skin.

Store the jacket in a cool, dry place. Avoid prolonged storage in direct sunlight or humid conditions, which can degrade the fabric and its protective treatments. Ensure it is clean and dry before storing.

Taped seams reinforce the stitching lines to prevent water from penetrating through the needle holes, ensuring the jacket remains fully waterproof.

The jacket's warmth depends on its layers. The outer shell provides wind and water protection. The included fleece lining adds insulation. For very extreme cold, additional thermal layers may be necessary.

The durable water-repellent (DWR) finish may have worn off. Re-apply a DWR treatment suitable for technical outerwear. Ensure the jacket is clean before application.

Clean the zipper teeth with a soft brush to remove any dirt or salt. Apply a silicone-based lubricant or a graphite pencil to the teeth.

Ensure the jacket is being dried correctly according to care instructions. Avoid excessive heat, which can damage fleece fibers. Gentle tumble drying on low heat can sometimes help restore loft.

Check if the taped seams are intact. If there is visible damage to the tape, the jacket may need professional repair or replacement. Ensure no detergents or fabric softeners were used that could compromise the seam tape.