Shopping.co.uk

Screws City T-Nuts Four Pronged Captive Blind Threaded Inserts For Wood Furniture - M8 - Pack Of 50 - Silver - A02E

Screws City T-Nuts Four Pronged Captive Blind Threaded Inserts For Wood Furniture - M8 - Pack Of 50 - Silver - A02E

Zinc Plated Steel T-Nuts Four Pronged – AN 90. High-quality four pronged T-nuts manufactured to AN...

Best current price£4.64from B&Q

Colour
BlackBrownSilverWhite

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£4.64Visit shop

B&Q - M6 (6mm X 12mm)Pack Of 20An 90Zinc Plated T-Nuts Four Pronged Captive Blind Threaded Inserts For Wood FurnitureA02E

Visit shop

All Offers

10 offers from £4.64 - £7.04

View price history by clicking the chart icon.

B&QB&Q - M6 (6mm X 12mm)Pack Of 20An 90Zinc Plated T-Nuts Four Pronged Captive Blind Threaded Inserts For Wood FurnitureA02E
Free delivery in 1–3 days
£4.64
Visit shop

Product Information

Full details

This guide is for DIY enthusiasts and woodworkers needing reliable threaded anchor points in wood. The Screws City Four Pronged T-Nuts offer a secure and stable solution for furniture assembly and repairs, preventing rotation. A minor caveat is their suitability primarily for wood applications.

All features

ColourSilver
Model Part NumberA02E
BrandScrews City

Extended Product Information

FAQs

What material are these T-nuts made from?

They are made from zinc-plated steel.

What is the main advantage of the four-pronged design?

The four prongs provide a superior grip in wood and prevent the T-nut from rotating when a bolt is tightened.

Can these T-nuts be used in particleboard or MDF?

While they can be used in denser particleboard or MDF, their performance is best in solid wood. Test in a scrap piece first to ensure a secure hold.

What size bolt does the M8 T-nut accept?

The M8 T-nut is designed to accept an M8 bolt or screw.

Are these T-nuts suitable for outdoor use?

The zinc plating offers some corrosion resistance, but they are best suited for indoor applications. For outdoor use, consider stainless steel T-nuts.

How do I remove a T-nut if needed?

Removing T-nuts can be difficult as the prongs are embedded. You may need to carefully pry around the collar and try to pull it out, or drill it out if necessary.

What does 'AN 90 Standard' mean?

AN 90 is a standard specification for this type of fastener, ensuring a certain level of quality and design.

Troubleshooting

T-nut spins during bolt insertion.

Ensure all four prongs are fully embedded into the wood. If the wood is too soft, consider a larger pilot hole or a different type of fastener.

T-nut does not sit flush with the surface.

Check if the pilot hole is correctly sized and drilled to the appropriate depth. Ensure no obstructions are preventing the T-nut from seating fully.

Prongs bending during installation.

Use a hammer with controlled force or a pressing tool. If encountering very hard wood, a slightly larger pilot hole might be necessary, but be cautious not to make it too large.

Corrosion observed on the T-nut.

Wipe clean with a dry cloth. For minor surface rust, a very fine steel wool can be used cautiously. Avoid exposure to prolonged moisture or corrosive substances.

Pros and Cons

Pros

  • Provides strong and stable threaded anchor points in wood.
  • Four prongs prevent rotation, ensuring secure installation.
  • Zinc plating offers good corrosion resistance.
  • Manufactured to AN 90 standard for quality.
  • Suitable for blind installations.

Cons

  • Primarily designed for use in wood.
  • Requires appropriate tools for installation.
  • Specific thread size (M8 for this variant) may limit application.
  • Corrosion resistance is good but not suitable for highly corrosive environments.

Setup, Compatibility & Care

Setup:

  1. Select a pilot hole size appropriate for your wood type and the T-nut's prongs. Generally, a hole slightly smaller than the prong diameter is recommended.
  2. Place the T-nut over the pilot hole.
  3. Using a hammer or a suitable pressing tool, carefully tap or press the T-nut into the wood until the collar is flush with the surface and all four prongs are embedded.
  4. Ensure the prongs are driven in evenly for maximum stability.

Compatibility:

  • These T-nuts are designed for wood applications. Ensure the wood is sufficiently dense to hold the prongs securely.
  • The M8 thread size means they are compatible with M8 bolts or screws.

Care:

  • Clean with a dry or slightly damp cloth. Avoid abrasive cleaners.
  • Store in a dry place to maintain the integrity of the zinc plating.

Price History

DatePrice
Visit shop