Portwest Sealtex Ultra Unlined Jacket - Yellow - XXXXXL

The jacket is designed for high-visibility work environments, offering protection from rain and wind while ensuring the wearer is easily seen.

Always ensure the storm flap is closed, the cuffs are adjusted securely, and the hood is deployed or packed away as needed. Proper care as outlined will maintain its waterproof and windproof qualities.

The jacket provides excellent wind and rain protection, but it is unlined and primarily designed for protection against elements rather than insulation. Layering with thermal clothing underneath is recommended for cold conditions.

WP 5,000mm indicates the hydrostatic head, meaning it can withstand a water column of 5,000mm before showing signs of leakage. MVP 3,000g/m²/24hrs refers to the breathability rating, signifying the amount of water vapor that can pass through the fabric in 24 hours, indicating good breathability.

Wash with like colors using a mild detergent, do not use fabric softener, and do not dry clean. Tumble dry on low or drip dry. Avoid direct ironing on the reflective tape.

This PFAS-free finish causes water to bead and roll off the fabric's surface, enhancing its water repellency and helping the garment dry faster while being environmentally friendlier.

While functional and protective, its design is optimized for work. However, its high-visibility and weather-resistant features can be beneficial for casual outdoor activities where safety and protection are priorities.

This can occur if the fabric's breathability is compromised. Ensure the jacket is washed correctly with like colors and without fabric softener. Check that filters (if any) are clean and that there are no blockages in the vents.

Verify that the seams are properly sealed and that the PU coating is intact. Wash the garment according to instructions. For persistent issues, the waterproof membrane may be damaged.

Avoid excessive heat during washing and drying, and do not iron the reflective tape directly. Gently re-adhere with a low-heat iron if necessary, protecting the tape with a cloth. Damaged tape may need professional repair or replacement.

Ensure the fabric around the zipper is clear of obstructions. Apply a small amount of wax or silicone lubricant to the zipper teeth. Clean any debris that might be jamming the mechanism.