Marlcoatings Professional Heavy Duty Polyurethane Industrial Floor Paint - Grey - 20L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Marlcoatings Professional Heavy Duty Polyurethane Industrial Floor Paint in Grey is designed for refreshing old concrete surfaces and providing a hard-wearing finish suitable for industrial environments. It is ideal for areas like garages, car showrooms, and warehouses, offering a durable polyurethane oil-based solution. While it provides excellent longevity, users should ensure proper surface preparation for optimal adhesion and performance.
All features
| Colour | Grey |
|---|---|
| Brand | marlcoatings |
Extended Product Information
FAQs
What is the best way to prepare a concrete floor for this paint?
The concrete must be clean, dry, and free from all contaminants like oil, grease, and dust. Etching the surface with a suitable concrete etcher or using mechanical grinding is crucial for optimal adhesion. Always follow up with thorough rinsing and allow the surface to dry completely.
How long does the paint take to dry?
Drying times can vary based on temperature, humidity, and application thickness. Generally, allow for touch-dry within a few hours and recoat after 12-24 hours. Full cure for heavy traffic can take several days to a week.
Can this paint be used on garage floors with existing paint?
It is not recommended to apply directly over existing paint. For best results, existing coatings should be completely removed, and the bare concrete properly prepared before applying this industrial floor paint.
What kind of roller should I use?
Use a good quality, solvent-resistant roller designed for industrial or epoxy coatings. A medium-pile roller is typically suitable.
Is this paint suitable for outdoor concrete?
While durable, this paint is primarily formulated for indoor industrial environments. For outdoor use, consider products specifically designed for exterior concrete that offer UV resistance and flexibility for temperature changes.
What is the coverage rate of a 20L tin?
Coverage rates vary based on the porosity and condition of the concrete and the application thickness. Typically, a 20L tin can cover approximately 80-120 square meters for a single coat. Refer to the product's technical data sheet for precise figures.
Troubleshooting
Paint not adhering to the surface
Ensure the concrete was thoroughly cleaned, dry, and properly etched before application. Remove any contaminants like oil or grease.
Uneven finish or roller marks
Apply the paint evenly, maintaining a wet edge. Use a high-quality roller suitable for industrial paints. Ensure consistent application technique.
Bubbling or blistering
This can occur if moisture is trapped in the concrete or if applied in direct sunlight or on a very hot surface. Ensure the concrete is completely dry and apply in suitable conditions.
Slow drying time
Ensure application in recommended temperature and humidity ranges. Avoid applying too thickly, as this can prolong drying. Check ventilation.
Pros and Cons
Pros
- Excellent durability for heavy-duty applications.
- Renovates and protects concrete surfaces.
- Suitable for demanding industrial environments.
- Resistant to abrasion and chemicals.
- Provides a professional and clean finish.
Cons
- Requires thorough surface preparation for best results.
- Oil-based formula may have strong odors during application.
- Longer drying times compared to water-based alternatives.
- Primarily designed for concrete, may not be suitable for other surfaces without specific preparation.
Setup, Compatibility & Care
Preparation:
- Ensure the concrete surface is clean, dry, and free from grease, oil, and existing coatings.
- Repair any cracks or spalling.
- For best adhesion, etch the concrete using a suitable acid etcher or mechanical grinding.
- Allow the surface to dry completely.
Application:
- Apply using a brush, roller, or sprayer designed for industrial coatings.
- Apply in well-ventilated conditions.
- Two coats are recommended for optimal durability.
- Allow adequate drying time between coats as per manufacturer instructions.
Compatibility:
- Primarily designed for bare, properly prepared concrete.
- Not recommended for previously painted or coated surfaces unless they are completely removed and the concrete is prepared.
Care:
- Clean spills immediately.
- For general cleaning, use a damp mop and mild detergent. Avoid abrasive cleaners.
- Periodically inspect for wear and reapply if necessary.