Bosch Water Pump Pliers - 250mm

The maximum jaw opening is 46mm.

These pliers feature 26 teeth for enhanced grip.

They are constructed from hard carbon steel with a phosphate finish for rust resistance.

Yes, they are suitable for various clamping and gripping tasks involving nuts, bolts, and pipes within their size capacity.

Adjustment is made via a push-button mechanism on the joint, allowing for fine tuning of the jaw opening.

While they are rust-resistant due to the phosphate finish, it is recommended to clean and dry them after exposure to moisture to prolong their lifespan.

The product title indicates these are 250mm pliers.

Ensure the joint is clean and free from debris. Apply a small amount of lubricant to the joint mechanism and try operating the adjustment button again. Check that the jaws are not fully open or closed, as this can sometimes make adjustment stiffer.

Verify that the object is within the 46mm jaw capacity. Ensure the teeth are clean and not worn down. For slippery surfaces, try repositioning the pliers for a better bite from the teeth.

Clean the sliding joint mechanism thoroughly. Inspect for any bent parts or obstructions. Lubricate the joint with a suitable oil for tools. Work the pliers back and forth to distribute the lubricant.