Setup, Compatibility & Care
Setup & Surface Preparation
Achieving the best finish with Johnstone's MY Colour paint in Black requires proper surface preparation:
- Clean: Ensure surfaces are free from dirt, dust, grease, and loose paint. Use a mild detergent if necessary, then rinse thoroughly and allow to dry.
- Smooth: Fill any cracks or holes with a suitable filler and sand smooth. Remove any sanding dust.
- Prime (Optional but Recommended for Dark Colours): For best results, especially when painting over lighter colours or porous surfaces, apply a suitable primer. This improves adhesion and ensures a more even, deep black finish.
- Mask: Use painter's tape to protect adjacent surfaces, trim, and light fixtures.
Application
- Stir Well: Always stir the paint thoroughly before and during use.
- Apply Evenly: Use a high-quality brush or roller. Apply paint in thin, even coats, avoiding over-application, which can lead to drips or an uneven finish. For large areas, maintain a wet edge to minimize roller marks.
- Multiple Coats: Allow adequate drying time between coats (refer to product label for specific times). Two coats are typically recommended for optimal colour depth and durability, but a third may be needed depending on the original surface colour.
Compatibility
This paint is suitable for interior walls, ceilings, wooden furniture, and cabinets. It adheres well to properly prepared plaster, drywall, wood, and metal surfaces.
Care & Maintenance
- Cleaning: The durable matt finish is designed to be washable. For minor marks, gently wipe the affected area with a soft, damp cloth and mild soap. Avoid harsh abrasive cleaners or vigorous scrubbing, as these can damage the matt finish and create a sheen.
- Touch-ups: Keep a small amount of paint for future touch-ups to seamlessly repair small imperfections.