Polycell Fine Surface Polyfilla is the easy way to fill fine cracks up to 2mm, minor blemishes or ...Polycell Fine Surface Polyfilla is the easy way to fill fine cracks up to 2mm, minor blemishes or wood grain for a professional, glass smooth surface for painting. Apply with palette knife. Fills cracks up to 2mm wide. For a professional glass smooth surface for painting. Dimensions: Depth 5cm x Width 6.5cm x Height 23cm.
This guide is for anyone looking to repair fine cracks, minor blemishes, or smooth wood grain before painting. Polycell Fine Surface Polyfilla offers a quick and easy way to achieve a professional, glass-smooth finish. It's ideal for indoor use on plaster and wood surfaces. However, it's not suitable for outdoor applications.
All features
Colour
White
Model Part Number
5084946
Brand
Polycell
Extended Product Information
FAQs
How long does it take for the Polyfilla to dry?
Surface dry in approximately 30-60 minutes, depending on conditions and the depth of the fill.
Can I use this product outdoors?
No, this product is designed for indoor use only.
What surfaces can I use this on?
It is suitable for use on plaster and wood surfaces.
How do I clean the tools after use?
Replace the cap and remove excess filler from tools before cleaning in warm water.
What is the maximum crack width this product can fill?
It can fill cracks up to 2mm wide.
Do I need to sand the surface before applying paint?
Yes, it is recommended to sand the filled area with fine sandpaper after it has dried for a smooth finish.
Can I apply multiple coats?
Yes, for deeper imperfections, apply in thin layers, allowing each layer to dry completely.
Troubleshooting
Filler is not adhering to the surface.
Ensure the surface is clean, dry, and free of loose material. Sand glossy surfaces to improve adhesion.
Filler is cracking after drying.
Do not overfill; ensure the filler is level with the surface. Consider applying multiple thin layers, allowing each to dry completely.
Filler is not smooth after drying.
Sand the filled area with fine sandpaper once it is fully dry.
Pros and Cons
Pros
Easy to apply with a filling knife.
Quick drying time allows for faster project completion.
Provides a professional, smooth finish.
Minimal VOC content for safer use.
Suitable for a variety of surfaces (wood and plaster).
Cons
Only suitable for cracks up to 2mm wide.
Requires sanding if overfilled.
Not suitable for outdoor use.
Limited to indoor applications only.
May require multiple applications for deeper imperfections.
Setup, Compatibility & Care
Surface Preparation:
Ensure the surface and cracks are dry and free of loose material.
Sand down gloss surfaces to maximize filler adhesion.
Touch in nail and screw heads with a suitable metal primer.
Application:
Squeeze filler directly onto a filling knife.
Spread over the surface, pressing in well.
Remove excess filler and ensure it's level with the surface.
Drying:
Allow the filler to dry completely.
Drying time is between 0.5 to 1 hour depending on the conditions and depth of fill.
Sanding (if needed):
If necessary, sand down with fine sandpaper when fully dry.
Cleaning:
Replace the cap and remove excess filler from tools before cleaning in warm water.