Best current price£26.40from Cast In Style
Shopping.co.uk recommended and popular offers
Cast In Style£26.40Visit shop Pewter Heavy Duty Bathroom Mortice Lock
Visit shop
B&Q£55.30Visit shop B&Q - Pewter 2 1/2" Heavy Duty Bathroom Mortice Lock
Visit shop4 offers from £26.40 - £55.30
View price history by clicking the chart icon.
This heavy-duty mortice lock from From the Anvil is designed for secure and reliable operation on bathroom doors. Offering robust construction and CERTIFIRE approval, it provides peace of mind for residential and commercial use. A key consideration is its specific design for bathroom doors, meaning it may not be suitable for all door types.
| Colour | Grey |
|---|---|
| Model Part Number | 51779 |
| Brand | From the Anvil |
This lock is a heavy-duty mortice lock specifically designed for use on bathroom doors.
The lock is available in two sizes: 64mm (2.5 Inch) and 76mm (3 Inch) backset.
Yes, the lock is CERTIFIRE Approved and fire tested to FD-20/30/60 standards.
The lock is constructed from Mild Steel with a Pewter Finish.
Yes, it is supplied complete with both forend and strike plates.
The lock comes with a 5-year guarantee.
It is designed to be compatible with lever on rose handles that utilize through bolts, as it features bolt-through holes.
Ensure the door is not warped and is hanging correctly. Check that the lock case and bolt are aligned correctly with the strike plate. If the issue persists, a small amount of graphite lubricant can be applied to the moving parts of the lock mechanism.
Verify that the spindle is correctly installed and that the handle mechanisms are properly aligned with the lock spindle. Ensure no obstructions are present within the lock case.
Double-check the measurements for the lock case depth and forend size against the door preparation. Adjust the mortise cutouts as needed. Ensure the correct size lock (64mm or 76mm) has been selected for the door.
Setup:
This mortice lock requires a pre-cut mortise pocket in the door edge. Ensure the door is suitable for a 64mm (2.5 Inch) or 76mm (3 Inch) lock case size. Use the supplied forend and strike plates to mark and cut the necessary openings in the door and frame. The lock case should be a snug fit within the mortise. The bolt-through holes on the lock case should align with the holes for your chosen compatible lever on rose handles.
Compatibility:
Designed for use with bathroom doors, typically operated by a thumb turn or privacy lock mechanism on one side and a handle on the other. It is compatible with lever on rose handles that utilize through bolts, as the lock features corresponding holes. Ensure the backset size (distance from the edge of the door to the center of the spindle hole) matches your door preparation (either 64mm or 76mm).
Care:
Clean the lock and finish with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the Pewter Finish. For mechanical parts, periodic lubrication with a graphite-based lubricant may be beneficial if the lock feels stiff, but this is typically not required under normal use.
