Siramico Coatings Garden Paint 5L - Eco Resin Premium One Coat For Garden Furniture - Black

Yes, this Eco Resin Garden Paint is suitable for use on wooden decking. Ensure the decking is clean, dry, and in good condition before application for best results.

Typically, two coats are recommended for best coverage and durability. However, the number of coats may vary depending on the surface condition and the desired finish. For very porous or dark surfaces, more coats might be necessary.

Yes, it can be used on metal garden furniture. For optimal adhesion and to prevent rust, it is recommended to use a suitable metal primer before applying the garden paint.

Coverage varies depending on the surface porosity and application method, but generally, one litre covers approximately 10-12 square metres per coat.

The paint is VOC-free and low odour, making it a safer choice. However, it is advisable to keep pets and children away from the painted area until the paint is fully dry to avoid contact.

When applied correctly to a prepared surface, the durable, weatherproof, and UV-resistant formulation is designed for long-lasting protection, typically lasting several years. Performance can depend on environmental exposure and maintenance.

It is not recommended to mix this paint with other paint types or brands, as it may affect the performance and durability of the coating. Mixing with other Siramico Coatings colours from the same range might be possible, but always test a small area first.

Ensure the surface was properly cleaned, dry, and free from contaminants before application. Consider using a primer if painting bare or porous material. Surface temperature may have been too low or too high during application.

Ensure the paint was thoroughly stirred. Apply thin, even coats using a quality brush or roller. Avoid overloading the brush/roller. Ensure consistent application technique.

Check ambient temperature and humidity. Cooler temperatures and higher humidity will increase drying times. Ensure paint is applied in a well-ventilated area.

Ensure paint has been adequately stirred. If necessary, a very small amount of water (less than 5% by volume) can be added for easier application, but this may affect drying time and finish.