Best current price£7.36from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£7.36Visit shop Liberon Grain 126736 Palette Wood Dye Walnut 250Ml
Visit shop
B&Q£10.45Visit shop B&Q - Palette Wood Dye Water-Based Medium Oak 250Ml TinEnhance Natural Grain With Subtle Tint
Visit shop
The Range£11.67Visit shop Liberon Palette Wood Dye Teak 250Ml - Water-Based Dye For Wood Finishes - Clear
Visit shop85 offers from £7.36 - £17.85
View price history by clicking the chart icon.
The Liberon Palette Wood Dye is designed for DIY enthusiasts and professional woodworkers looking to naturally colour interior bare wood. Its key benefit is enhancing the wood grain's natural beauty while providing a base for various finishes. A potential caveat is its water-based nature, which might require careful application to avoid raising the grain excessively on certain woods. This acrylic dye is suitable for both soft and hardwoods and can be mixed to create custom shades, ideal for projects like flooring, furniture, and decorative items before applying oil, wax, varnish, or French polish.
| Colour | Brown |
|---|---|
| Model Part Number | 126736 |
| Brand | Liberon |
No, Liberon Palette Wood Dye is specifically designed for interior *bare* wood only. Existing finishes must be completely removed before application.
You can mix different shades of Liberon Palette Wood Dye together in a separate container to create your desired custom colour. Experiment with small batches first.
The coverage is approximately 8-16 square meters per litre, depending on the porosity of the wood and the application method.
The minimum drying time is 2 hours. Ensure the dye is completely dry before applying any topcoat.
No, this product is formulated for interior use only.
Liberon Palette Wood Dye is suitable for use prior to oil, wax, varnish, and French polish finishes.
Clean your brushes or foam applicators immediately after use with water.
Ensure the wood is properly prepared and free of contaminants. Apply the dye evenly with consistent brush strokes or applicator pressure. Avoid over-applying in one spot. Sand lightly and reapply if necessary.
This can occur with water-based dyes. Lightly sand the surface with fine-grit sandpaper after the dye has fully dried and before applying a topcoat. Consider a pre-treatment with a wood conditioner on very porous woods.
Verify that the surface is bare wood and free from any existing finishes, oils, or waxes. Ensure the wood is completely dry before application.
Clean brushes and applicators immediately after use with water. If the dye has dried on the tools, try soaking them in warm, soapy water.
Setup: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand bare wood if necessary and wipe clean. Stir the dye thoroughly before application.
Compatibility: This dye is designed for interior bare wood and is compatible with oil, wax, varnish, and French polish finishes applied subsequently. It is suitable for both softwoods and hardwoods.
Care: Clean application tools, such as brushes or foam applicators, immediately after use with water. Store the dye in a cool, dry place, tightly sealed, away from direct sunlight and frost.
