JENOLITE Directoplast Multi-Surface Paint - White Gloss - 400Ml Spray Can

JENOLITE Directoplast Gloss Paint is an all-in-one primer, undercoat, and topcoat in a single appl...

Best current price£14.99from B&Q

Colour

All Offers

2 offers from £14.99 - £30.99

View price history by clicking the chart icon.

B&QB&Q - Directoplast Multi-Surface PaintWhite Gloss400Ml Spray Can
Free delivery in 1–3 days
£14.99
Visit shop

Product Information

Full details

This guide is for anyone looking to restore or rejuvenate plastic surfaces, such as garden furniture or car trim. The JENOLITE Directoplast Gloss Spray Paint offers an all-in-one solution, acting as a primer, undercoat, and topcoat, providing a durable, high-gloss finish. Keep in mind that while it works on most plastic surfaces, optimal results are achieved when surfaces are properly prepared.

All features

ColourWhite
BrandJENOLITE

Extended Product Information

FAQs

What surfaces can I use JENOLITE Directoplast on?

It is designed for use on most plastic surfaces, including garden furniture and car trim.

Do I need to use a primer?

No, JENOLITE Directoplast is an all-in-one product that doesn't require a primer.

How many coats of paint should I apply?

For best results, apply multiple thin coats, allowing each coat to dry completely before applying the next.

How long does it take for the paint to dry?

It typically takes a few hours to be touch dry and up to 24 hours to fully cure, depending on environmental conditions.

Can I use this paint outdoors?

Yes, JENOLITE Directoplast is weather-resistant and suitable for outdoor use.

How should I prepare the surface before painting?

Clean the surface thoroughly with soap and water, and lightly sand it to improve adhesion.

How do I clean the painted surface?

Use a mild detergent and water to clean the painted surface. Avoid abrasive cleaners.

Troubleshooting

Paint is running or dripping.

Apply thinner coats and ensure the can is held the correct distance from the surface. Avoid applying too much paint at once.

Poor adhesion or peeling.

Ensure the surface is properly prepared by cleaning and lightly sanding. Allow sufficient drying time between coats.

Uneven finish or bubbling.

Ensure the can is shaken well before use. Apply the paint in even strokes and avoid applying in direct sunlight or high winds.

Pros and Cons

Pros

  • All-in-one formula simplifies the painting process.
  • Provides a durable, weather-resistant finish.
  • No primer required, saving time and effort.
  • Suitable for various plastic surfaces.
  • Offers a high-gloss, professional look.

Cons

  • May require multiple coats for optimal coverage.
  • Surface preparation is essential for best results.
  • Limited to use on plastic surfaces.
  • Specific colour availability may vary.

Setup, Compatibility & Care

  1. Preparation: Clean the plastic surface thoroughly with soap and water to remove dirt, grease, and loose particles. Lightly sand the surface to improve adhesion.
  2. Application: Shake the can well before use. Hold the can approximately 20-30 cm from the surface and apply in even strokes. Apply multiple thin coats, allowing each coat to dry before the next is applied.
  3. Drying: Allow the paint to dry completely. Drying times can vary depending on temperature and humidity, but generally, it takes a few hours to be touch dry and up to 24 hours to fully cure.
  4. Compatibility: JENOLITE Directoplast is designed for use on most plastic surfaces. Always test on a small, inconspicuous area first to ensure compatibility.
  5. Care: Clean the painted surface with a mild detergent and water. Avoid using abrasive cleaners or solvents that could damage the finish.

Price History

DatePrice
Visit shop