![Lapp H05V2-K Installation Wire - 4515001-100 [100 Meters] - Green](https://shopping-cdn.redbrainapis.com/v/4d135e47f8b6a34ee46c51bec3c7c07e5638742e34f2b3438867edeaca7f8559_500x500.jpeg)
Best current price£27.76from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£27.76Visit shop Lapp Green H05v2-K Installation Wire - 4515121-100 [100 Meters]
Visit shop7 offers from £27.76 - £90.45
View price history by clicking the chart icon.
This guide is for electricians and DIYers working on low-voltage electrical installations. The Lapp H05V2-K 90° installation wire offers flexibility and a high-quality PVC insulation for reliable connections in demanding environments. A key consideration is its specific voltage rating, ensuring it's used within its designed operational limits.
| Colour | Green |
|---|---|
| Model Part Number | 4515001 |
| Brand | LAPP |
This wire is designed for fixed, low-voltage electrical installations within buildings, such as for internal wiring, control systems, and lighting circuits.
The H05V2-K designation with PVC insulation is generally intended for indoor applications. For outdoor use, consult manufacturer specifications for suitability or consider cables with enhanced weather-resistant sheathing.
'H05' indicates a harmonized cable for low voltage up to 500V to earth. 'V2' refers to a PVC insulation rated for 90°C. 'K' signifies a flexible conductor.
Yes, the green/yellow conductor is universally recognized as the protective earth (ground) conductor in electrical installations.
The nominal voltage for this wire is 500V. It should be used in circuits operating at or below this voltage.
The 0.5mm² cross-section and 500V rating are suitable for specific low-voltage circuits within a building, but not typically for general mains power distribution which requires larger cross-sections and higher voltage ratings.
Ensure the wire is at room temperature. Extreme cold can temporarily reduce flexibility. Avoid forcing bends that could damage the conductor or insulation.
Check termination points for loose connections, corrosion, or debris. Re-strip the wire if necessary and ensure a secure connection with appropriate connectors or terminals.
Inspect the entire length of the wire for cuts, abrasions, or signs of melting. If damage is found, replace the affected section of wire or the entire run to ensure safety.
Setup: This wire is designed for professional installation. Ensure that the appropriate tools for stripping and terminating wires are used. Connect the green/yellow conductor to the earth terminal of your system. Verify that the wire's nominal voltage (500V) and cross-section (0.5mm²) are suitable for the intended application and comply with local electrical codes.
Compatibility: Compatible with standard electrical connectors, terminals, and conduit systems designed for wires of this diameter and type. It is suitable for use within the temperature range specified by the EN 50525 standard for H05V2-K cables.
Care: This wire is intended for permanent installation. Avoid excessive bending or kinking during installation. Protect the wire from physical damage, sharp objects, and exposure to chemicals or solvents that could degrade the PVC insulation. Ensure proper ventilation around the cable run if operating near the maximum temperature limits.
