Best current price£6.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£6.99Visit shop Hycote Silver/Grey Touch Up Colour Paint Brush Bmw Metallic 12.5Ml
Visit shop
B&Q£13.49Visit shop B&Q - Colour Touch Up Brush Paint Xcbm406 Bmw Silver Grey (Metallic) 12.5Ml
Visit shop5 offers from £6.99 - £16.99
View price history by clicking the chart icon.
This Hycote Colour Touch Up Brush Paint in BMW Silver Grey (Metallic) 12.5ml is designed for car owners looking to quickly and easily repair minor paint damage like scratches and stone chips. Its key benefit is providing a fast-drying, hard-wearing finish that is colour-matched to specific BMW models, offering excellent resistance to sunlight and fading. A potential caveat is its small volume, best suited for very localized repairs rather than larger areas.
| Colour | Grey |
|---|---|
| Model Part Number | XCBM406 |
| Brand | Hycote |
| Container Volume | 12.5 |
Clean the area thoroughly with a degreaser, ensuring it is completely dry. Remove any loose paint flakes or rust. Light sanding might be beneficial for adhesion.
While it is designed for small repairs, multiple thin coats can cover slightly larger areas. However, for significant repainting, a larger quantity of paint would be more appropriate.
When stored correctly with the lid tightly sealed in a cool, dry place, the paint should remain usable for a considerable time. However, performance may gradually degrade over extended periods.
Apply in several thin, light coats, allowing each to become touch-dry before applying the next. Maintain consistent brush strokes and pressure. Avoid overworking the paint.
Yes, the product description states it is compatible with plastics, making it suitable for minor repairs on interior plastic trim, provided the surface is clean and prepared.
Allow each coat to become touch-dry before applying the next. This typically takes around 15-30 minutes, but can vary depending on temperature and humidity.
While not explicitly mentioned, applying a compatible clear coat after the base color has fully cured can offer added protection and gloss, similar to a standard paint job.
Ensure the brush is properly seated in the pot and has paint on it. Shake the pot again vigorously for another minute. If the paint has dried in the neck, carefully clear it with a suitable solvent (test in an inconspicuous area first).
Apply paint in multiple thin coats rather than one thick coat. Ensure the surface is smooth before application. For metallic finishes, try to maintain consistent brush pressure and direction.
Verify that you have the correct paint code for your specific BMW model. Ensure the paint has been thoroughly mixed. Ambient lighting conditions can also affect perceived color match during application.
Ensure you are applying in a well-ventilated area with moderate temperature and humidity. Avoid applying overly thick coats, as this will increase drying time.
Setup: Ensure the surface to be repaired is clean, dry, and free from grease or loose paint. Lightly sand the area if necessary to create a smooth base. Shake the touch-up pot vigorously for at least two minutes before use to thoroughly mix the paint and metallic particles. Apply the paint using the integrated brush in thin, even coats. Allow adequate drying time between coats.
Compatibility: This paint is compatible with OEM finishes, acrylic finishes, and cellulosic finishes. It can be used on a variety of substrates including metals, plastics, wood, and ceramics.
Care: Store the touch-up pot in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the lid is tightly closed after use to prevent the paint from drying out.
