Short waterproof windbreaker Aigle MTD - XXL - Blue

MTD is a technology that provides waterproof, windproof, and breathable protection. It is rated at 10,000 Schmerbers for waterproofing.

This jacket is unlined and designed for lightweight protection. It offers wind and water resistance but minimal insulation, making it best suited for transitional seasons or as an outer layer over warm clothing in winter.

Turn the jacket inside out and fold it into the designated inner pocket. Secure it using the integrated cord and carabiner.

The jacket has a waterproof rating of 10,000 Schmerbers.

Yes, the regular fit should accommodate layering over a sweater. However, very bulky layers may slightly restrict movement.

The reflective prints are designed for durability but should be cared for according to the instructions (avoid high heat, direct ironing on prints) to maintain their effectiveness.

'2.5L' refers to the fabric construction, indicating a 2.5-layer laminate. This typically means a waterproof membrane sandwiched between an outer face fabric and a protective inner coating, offering a balance of durability, weight, and waterproofness.

Ensure the waterproof seams are intact. The fabric's water-repellency may diminish over time; consider a re-waterproofing treatment if necessary. Check that all zippers are fully closed.

Gently clean the zipper teeth. Apply a small amount of silicone-based lubricant or wax specifically designed for zippers. Ensure no fabric is caught in the zipper track.

This can happen in very humid conditions. Ensure the hood and hem adjustments are not sealed too tightly to allow for some air circulation. The breathability of the MTD fabric is dependent on the temperature and humidity differential.

Avoid high-heat drying and direct ironing on the prints. If peeling occurs, carefully iron on a very low setting from the inside, through a protective cloth, to re-adhere the print.