Shopping.co.uk

Cordless LED Work Light - Pink - For Einhell 18V Pxc Battery

Not AvailableCordless LED Work Light - Pink - For Einhell 18V Pxc Battery

Super Bright Work Light: This upgraded cordless work light has 42 lamp beads, 80W ultra-high brigh...

Currently unavailable

Colour
BlueBrownGreenOrangePinkWhiteYellow

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

The Edtran Cordless LED Work Light is designed for tradespeople, DIY enthusiasts, and outdoor adventurers needing powerful, portable illumination. Its key benefit is the ultra-high brightness (up to 8000LM) with adjustable settings and a flexible head, ensuring your workspace is well-lit. A caveat to consider is that it requires a compatible Einhell 18V PXC battery, which is not included. This work light offers 80W of power with 42 lamp beads, a 140° rotating head, dual USB/Type-C charging ports, and a durable aluminum shade for efficient heat dissipation.

All features

ColourPink
Model Part NumberEIN18VRS
BrandEdtran

Extended Product Information

FAQs

What type of batteries does this work light use?

This work light is compatible with Einhell 18 V Power X-Change (PXC) batteries, with capacities ranging from 2.0 Ah to 6.0 Ah.

Does the battery come included with the work light?

No, the Einhell 18V PXC battery is sold separately and is required for the work light to operate.

Can I use this work light to charge my phone?

Yes, the work light features both a USB port (5V 2A) and a Type-C port (PD18W) that can be used to charge external devices like smartphones, acting as a mobile power supply.

What are the brightness levels?

The work light offers two brightness modes: a low brightness of 4000 lumens and a high brightness of 8000 lumens.

How long will the light run on a single charge?

The run time depends on the capacity (Ah) of the Einhell battery used and the selected brightness mode. A higher capacity battery will provide longer run times. For example, a 4.0 Ah battery might last several hours on low and fewer hours on high.

How do I prevent the battery from draining when the light is not in use?

It is recommended to remove the battery from the work light when it is not in use for extended periods. The light does have built-in low voltage protection, but removing the battery ensures no power is drawn.

What is the IP rating of this work light?

The product description does not specify an IP (Ingress Protection) rating. It is suitable for job sites and outdoor use but should be protected from heavy rain or submersion.

Troubleshooting

Work light does not turn on

Ensure the Einhell 18V PXC battery is fully charged and correctly inserted into the work light. Check that the battery is compatible with the Einhell Power X-Change system. Try a different compatible battery if available.

Light flickers or brightness decreases suddenly

This indicates the battery voltage is low. The work light has built-in low voltage protection. Recharge or replace the battery with a fully charged one.

USB/Type-C ports not charging devices

Confirm the work light is powered on (battery is inserted and the light is active). Ensure the device's charging cable is properly connected to the correct port (USB or Type-C). The work light must be providing power for these ports to function.

Work light feels unusually hot

While some warmth is normal due to heat dissipation, excessive heat could indicate poor ventilation. Ensure the aluminum shade and vents are not blocked during operation. If the heat is extreme, turn off the light and allow it to cool.

Pros and Cons

Pros

  • Provides exceptionally bright light for various tasks.
  • Highly portable due to its cordless design and battery compatibility.
  • Versatile with adjustable brightness and a flexible head.
  • Can also charge other devices, adding utility.
  • Robust construction designed for longevity and efficient heat management.

Cons

  • Requires a separate purchase of a compatible Einhell 18V PXC battery.
  • The battery is not included with the work light.
  • Can drain the battery if left connected when not in use without proper precautions.
  • Brightness reduction and flashing indicate low battery, potentially interrupting work.

Setup, Compatibility & Care

Compatibility: This work light is designed to be compatible with Einhell 18 V Power X-Change (PXC) batteries, ranging from 2.0 Ah to 6.0 Ah. Ensure your battery is from this series for proper function.

Setup:

  1. Select a compatible Einhell 18V PXC battery.
  2. Align the battery with the battery slot on the work light.
  3. Slide the battery in firmly until it clicks into place.
  4. Press the power button to turn the light on.

Care Instructions:

  • Cleaning: Wipe the aluminum shade and body with a clean, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
  • Storage: Store the work light in a dry, cool place. Crucially, remove the battery when the light is not in use for extended periods to prevent accidental battery drain. The light includes low voltage protection, but removing the battery is the best practice.
  • Heat Dissipation: Ensure the ventilation areas around the aluminum shade are not obstructed during use to allow for efficient heat dissipation.