This garden furniture stain from the Cuprinol Softwood & hardwood range can be applied using a bru...This garden furniture stain from the Cuprinol Softwood & hardwood range can be applied using a brush to colour and provide protection. It takes 2-6 hours to dry and will cover up to 20 m² per litre on average. The Cuprinol Softwood & Hardwood Furniture Stain creates a lasting water-repellent barrier and weather protection. Suitable for all woods, including hardwood and softwood. It adds a rich colour to softwood and a light tint to hardwood. Coverage: Approx. 15m² per 750ml. Size: 750ml.
This guide helps you understand and effectively use Cuprinol Garden Furniture Stain. It's designed for anyone looking to protect and enhance their garden furniture, offering a water-repellent barrier that resists cracking and peeling. However, it's essential to note that the final color will depend on the wood type and the number of coats applied. This guide covers everything from application to care, ensuring your furniture looks great for years.
All features
Colour
Brown
Model Part Number
5158524
Brand
Cuprinol
Extended Product Information
FAQs
How much area does a 750ml can cover?
A 750ml can typically covers approximately 15 m².
How long does it take for the stain to dry?
It takes 2-6 hours to dry between coats under normal weather conditions.
How many coats should I apply?
Apply 2-3 coats for optimal protection.
Can I use this stain on indoor furniture?
No, this product is specifically designed for outdoor garden furniture.
How do I clean my brushes after use?
Clean your brushes with water after use.
What is the VOC content?
The VOC content is Low (0.3 - 7.99%).
Where should I store the stain?
Store in a cool, dry place away from direct sunlight and avoid extremes of temperature.
Is it suitable for use on bare oily timbers?
Yes, but you should wipe bare oily timbers such as teak with white spirit and allow to dry fully before application of this product.
Troubleshooting
Stain appears uneven or blotchy.
Ensure the surface is properly prepared by sanding. Apply thin, even coats, and avoid over-brushing. Make sure you stir the stain thoroughly before application.
Stain is peeling or cracking.
Ensure the surface is clean and dry before application. Apply the stain in the correct temperature range (above 5 degrees C). Avoid applying thick coats. Consider the wood type and preparation steps.
Color is not as expected.
The final color depends on the wood type and number of coats. Test the stain on an inconspicuous area first. Apply the recommended number of coats.
Stain takes too long to dry.
Ensure proper ventilation and apply in temperatures above 5 degrees C. Avoid applying in damp conditions or if rain is likely.
Pros and Cons
Pros
Provides a long-lasting water-repellent barrier.
Suitable for both hardwood and softwood furniture.
Quick-drying formula allows for faster project completion.
Enhances the natural wood grain.
Easy to apply with a brush.
Water-based, making cleanup simple.
Cons
The final color depends on wood type and coats applied.
Requires 2-3 coats for optimal protection.
Not suitable for indoor use.
Requires proper surface preparation for best results.
Application is not recommended in temperatures below 5 degrees C.
Setup, Compatibility & Care
Setup
Surface Preparation: Clean the furniture, removing dirt and old finishes. Sand the surface lightly.
Stir Thoroughly: Before use, stir the stain to ensure even color distribution.
Application: Apply 2-3 coats, allowing 2-6 hours drying time between coats under normal weather conditions. Apply evenly, avoiding overlaps.
Compatibility
Suitable for all types of wood including hardwood and softwood garden furniture.
Ensure that the wood has been treated with an appropriate wood preserver before applying the stain, to prevent rot and blue stain.
Care
Clean up any spills immediately with water.
Avoid using harsh chemicals or abrasive cleaners.
Store the stain in a cool, dry place away from direct sunlight.
Do not use or store in extremes of temperature or wet conditions. Ensure the product has dried completely before exposure to wet conditions.