Spear & Jackson Garden Sprayer - 5 Litre

The sprayer is designed for use with water and non-viscous, water-based or soluble products such as pesticides, herbicides, insecticides, fungicides, and fertilisers.

Locate the pressure release valve, typically on the top or side of the sprayer, and carefully release the pressure before opening the bottle.

After each use, release the pressure and rinse the bottle, hose, and nozzle with clean water. Allow all parts to dry before storing.

The adjustable nozzle allows you to change the spray pattern from a fine mist to a direct spray, offering versatility for different applications.

Check for leaks, ensure all connections are secure, and inspect the nozzle for blockages. Also, ensure the pump is correctly assembled and the bottle cap is properly sealed. Refer to the troubleshooting section for further assistance.

No, this sprayer is not designed for use with oil-based products. Use only with water and non-viscous, water-based or soluble solutions.

Instructions for safe use are clearly printed on the bottle.

Check the pump mechanism and ensure it's properly connected. Inspect for any leaks. Make sure the nozzle is not blocked. Check the seal between the pump and the bottle.

Check all connections (hose, nozzle, pump) for tightness. Inspect the seals and replace if necessary. Ensure the bottle cap is properly sealed.

Clean the nozzle to remove any blockages. Adjust the nozzle setting to achieve the desired spray pattern. Ensure the nozzle is free of debris.

This is normal when releasing pressure. If it's continuous, check the valve for damage or debris.