Green Haven 5 Litre Pump Action Pressure Sprayer

Rinse the tank and nozzle with clean water after each use. Flush the sprayer to remove any residual chemicals. Disassemble the nozzle and clean any clogs.

The sprayer is designed for use with water and soluble products. Always check the chemical compatibility with the sprayer materials before use.

Pump the handle several times to build pressure. Monitor the pressure gauge (if applicable) to avoid over-pressurizing the tank.

Rotate the nozzle to adjust the spray pattern from a fine mist to a jet spray.

Check all connections for tightness. Inspect the seals and replace any damaged parts. Ensure the tank cap is properly sealed.

Store the sprayer in a cool, dry place away from direct sunlight and extreme temperatures. Drain any remaining liquid from the tank before storage.

Yes, you can use the sprayer for herbicides, but be sure to clean it thoroughly after each use to prevent cross-contamination. Always follow the herbicide manufacturer's instructions.

Check for leaks in the tank, hose, or nozzle. Ensure the pump is properly sealed and that the pump mechanism is functioning correctly. Inspect the seals and replace if needed.

Inspect all connections for tightness. Check the seals for damage and replace as needed. Ensure the tank cap is properly sealed.

Check for clogs in the nozzle and clear them using a pin or small brush. Adjust the nozzle to the desired spray pattern. Ensure the tank has enough pressure.

Lubricate the pump mechanism with a silicone-based lubricant. Ensure the pump is clean and free of debris.