Inspired Essentials Tractor Spray Paint - J.D. Green - 400ml

The surface should be clean, dry, and free from dirt, grease, oil, and rust. For best adhesion, lightly sand any glossy or previously painted surfaces.

The paint is quick-drying. It typically offers a dry-to-touch time of around 15-30 minutes, with recoating possible after 1-2 hours, depending on temperature and humidity.

This paint is primarily designed for metal surfaces. While it might adhere to some plastics, testing on an inconspicuous area is recommended, as it may not be compatible with all plastic types.

Coverage can vary depending on application technique and surface porosity, but typically a 400ml can covers approximately 1.5 to 2 square meters with a single coat.

After use, turn the can upside down and spray for a few seconds to clear the nozzle. Store upright in a cool, dry place away from heat and open flames.

This spray paint is designed for standard tractor applications and is not formulated for high-heat environments like exhaust systems. For high-heat applications, specialized paints are required.

Always use in a well-ventilated area, wear a respirator or mask, gloves, and eye protection. Avoid inhaling the spray and keep away from sparks and open flames.

Shake the can more vigorously for a longer period. Ensure the nozzle is not clogged by inverting the can and spraying briefly. If the problem persists, try a new can.

Maintain a consistent distance from the surface and use smooth, sweeping motions. Apply multiple thin coats rather than one heavy coat. Ensure the surface is properly prepared.

Check ambient temperature and humidity. Ensure application occurred within recommended temperature ranges (10°C-30°C). Thicker coats or high humidity can slow drying times.

Colors can fade over time and vary between manufacturers. This paint is formulated for authentic J.D. Green. For perfect matching on older equipment, consider repainting the entire component or panel.