Best current price£271.58from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£271.58Visit shop Ubiquiti Protect Network Video Recorder
Visit shop
eBay£327.90Visit shop Ubiquiti UNVR Unifi Protect 4 Bay Network Video Recorder
Visit shop15 offers from £271.58 - £567.95
View price history by clicking the chart icon.
The Ubiquiti UNVR is an enterprise-grade Network Video Recorder designed for users needing robust surveillance storage and management. Its key benefit is providing ample storage for high-resolution footage and supporting a significant number of cameras, all managed through the intuitive UniFi Protect software. A potential caveat is its enterprise focus, which may involve a steeper learning curve for home users compared to simpler NVR solutions.
| Colour | Grey |
|---|---|
| Model Part Number | UNVR |
| Brand | Ubiquiti |
Yes, the Ubiquiti UNVR does not come with hard drives pre-installed. You will need to purchase and install compatible 2.5" or 3.5" SATA hard drives separately.
The UNVR has four drive bays. With four 8TB drives in a RAID 5 configuration, it can provide approximately 24TB of usable storage, sufficient for up to 30 days of 4K video for 15 cameras or Full HD video for 50 cameras.
Yes, you can access your surveillance recordings from virtually anywhere using a desktop computer or a mobile device (iOS and Android) via the intuitive graphical user interface of the UniFi Protect software.
RAID 1 (mirroring) provides data redundancy by writing the same data to two drives, offering better read performance but using only half of the total drive capacity for storage. RAID 5 offers a balance between storage capacity, data redundancy, and performance by distributing data across multiple drives with parity information.
The UNVR is optimized for use with Ubiquiti UniFi Protect cameras. While some ONVIF-compliant cameras might offer limited compatibility, it is recommended to use Ubiquiti cameras for the best experience and full feature set.
The UNVR features both a 1 Gigabit RJ45 port and a 10 Gbps SFP+ port. For higher camera counts or 4K streams, utilizing the 10 Gbps port with a compatible switch and transceiver is recommended for optimal performance and to avoid network bottlenecks.
Firmware updates are managed through the UniFi Protect interface. Navigate to the settings or system section within the UniFi Protect application to check for available updates and initiate the installation process.
Verify the power adapter is securely connected to the UNVR and the wall outlet. Try a different power outlet. Ensure the power switch is in the 'on' position.
Check the network cable connections for both the UNVR and your management device. Ensure the UNVR is assigned an IP address on your network (you can check your router's DHCP client list). Try restarting the UNVR and your management device.
Power off the UNVR and reseat the hard drives, ensuring they are properly seated in the drive bays. Verify that the drives are compatible and formatted correctly. Check the drive status within the UniFi Protect interface.
Ensure the UNVR's network connection is stable and has sufficient bandwidth (especially if using the 1GbE port). Check for firmware updates for both the UNVR and your cameras. Reduce the recording resolution or frame rate if necessary.
Check the status of individual drives in the UniFi Protect interface. If a drive has failed, replace it with a new compatible drive and initiate the RAID rebuild process. Ensure the unit is not overheating.
Setup:
Compatibility:
Care:
