Blackfriar Anti Slip Deck Coating - Clear

The coating is touch dry in 4-6 hours, recoatable in 12 hours, and fully hard in about 3 days.

The coverage rate is approximately 9 square meters per liter per coat.

No, this product is specifically designed for exterior timber decking and walkways.

Yes, lightly sanding the surface is recommended to ensure proper adhesion.

It depends. Ensure the existing coating is sound and compatible. Lightly sand the surface to promote adhesion.

Clean the surface with mild soapy water. Avoid abrasive cleaners or high-pressure washers.

A brush or roller is recommended for applying the coating.

Generally, one or two coats are recommended for optimal protection and slip resistance. Follow the manufacturer's instructions for best results.

Ensure the surface is clean, dry, and properly prepared. Lightly sand the surface before application. Check for any contaminants like grease or oil.

Apply the coating in thin, even coats, avoiding excessive build-up. Ensure thorough stirring before application. Consider applying a second coat.

Ensure adequate ventilation during application and drying. Check the temperature and humidity levels; lower temperatures and higher humidity can extend drying times.

Ensure that the coating is applied according to the instructions and that the micro-aggregate is evenly distributed. Ensure that the correct product is used.