DeWalt Roofing Nails - 3.1mm x 19mm

These nails are designed for securing roofing materials such as shingles and felt underlayment when used with the DeWalt DCN45RN Nailer, providing a secure and weather-resistant fix.

No, these nails are specifically designed and recommended for use with the DeWalt DCN45RN Roofing Nailer for optimal performance and safety. Compatibility with other models may vary and is not guaranteed.

Galvanised means the nails have a protective coating of zinc. This coating helps to prevent rust and corrosion, making the nails more durable and weather-resistant, especially in outdoor applications.

The difference is the length. The 3.1mm x 19mm nails are shorter, suitable for thinner materials or where less penetration is required, while the 3.1mm x 22mm nails are longer, offering greater holding power and suitable for thicker materials or applications requiring deeper embedding.

Store the nails in a dry, indoor location. Keep them in their original packaging until ready for use to protect the galvanised coating from moisture and damage.

While these nails are designed for roofing, their strong holding power and durability might make them suitable for certain other exterior construction tasks. However, always ensure the nail size and type are appropriate for the specific application and tool being used.

Ensure the nail strip is loaded correctly and fully seated in the magazine. Check for any bent or damaged nails that might be jamming the feed.

Remove the nailer magazine and clear any obstructions. Check for bent nails or debris. Ensure the correct type and size of nails are being used.

Verify the nailer's depth adjustment is set correctly. Ensure the air pressure (if pneumatic) or battery charge (if cordless) is sufficient. Check for obstructions in the material being nailed.

Inspect nails before loading. If the coating is significantly damaged, the nail may be more susceptible to rust and should be replaced. Handle nails carefully to avoid scuffing.