FWStyle Stora 3 Door Wardrobe - White Gloss

You will only need a screwdriver (preferably a Phillips head) and a small hammer to assemble the FWStyle Stora 3 Door Wardrobe.

The wardrobe is delivered flat packed in 3 separate boxes.

The left and middle sections share a metal hanging rail with a shelf above it. The right-hand section features five distinct shelves. Specific dimensions for each internal compartment are not provided, but they are designed for standard clothing items.

Yes, once fully assembled, the wardrobe can be heavy. It is recommended to have at least two people to safely move or lift the unit to its final position.

For general cleaning, wipe with a soft, damp cloth. For fingerprints or smudges, use a clean microfiber cloth to gently buff the surface. Avoid abrasive cleaners to protect the gloss finish.

No, the internal configuration of one hanging rail with a top shelf (left/middle) and five shelves (right) is fixed and cannot be altered during assembly.

Info needed: Warranty information is typically provided by the retailer or manufacturer at the point of purchase. Please check your purchase documentation or contact FWStyle customer service for details.

Ensure all cam locks and screws are fully tightened. Double-check that the strengthening bars are correctly installed and secured across the back panel. Verify the wardrobe is on a level surface; use furniture pads if needed to stabilize.

Adjust the soft-close hinges. Most hinges have adjustment screws that allow you to move the door up/down, left/right, and in/out. Follow the hinge adjustment section in your assembly guide for detailed instructions.

Check that the push-to-open catch is correctly aligned with the door plate. Ensure the catch is fully extended when the door is closed and that the door is pressed firmly in the correct spot to activate the mechanism. Slight adjustments to the catch's position may be necessary.

Immediately refer to your assembly guide and parts list. Contact FWStyle customer service with the specific part numbers and a description of the issue. Do not attempt to force assembly with incorrect or damaged parts.

This is common with high-gloss finishes. Regularly wipe the doors with a clean, dry microfiber cloth to remove smudges and maintain shine. For stubborn marks, a slightly damp cloth followed by a dry buff can be effective.