Volden Quick Dry Plasterboard Jointing, Filling & Finishing Compound 10Kg 8.3L Bag - White

Drying times depend on the application thickness and environmental conditions. Refer to the product packaging for specific drying times, usually a few hours.

This compound is specifically designed for plasterboards. Use on other surfaces is not recommended.

You will need a filling knife or trowel, a mixing container, a drill with a mixing paddle (optional), sandpaper, and appropriate safety gear (gloves, mask).

Store the remaining dry compound in a sealed, dry container to prevent moisture absorption. Avoid storing near heat sources or in direct sunlight.

Yes, once the compound is fully dry and sanded, it can be painted. Use a primer before painting for optimal results and a smoother finish.

The shelf life is typically around 12 months if stored correctly, in a dry environment and unopened. Check the packaging for the expiration date.

Clean tools immediately after use to prevent the compound from drying on them. Use water to clean the tools before the compound hardens.

Ensure the compound is applied in thin layers. Avoid over-application. Check for excessive drafts or high temperatures during drying.

Allow sufficient drying time. Use the appropriate grit sandpaper. Apply even pressure when sanding.

Ensure adequate ventilation. Check the surrounding temperature and humidity. Consider using a fan to improve air circulation.