Best current price£10.81from The Range
Shopping.co.uk recommended and popular offers
The Range£10.81Visit shop Jrp Riveting Products 4.8 X 16Mm Aluminium/Steel Dome Head Rivets - Jrpasds4816 - Box Of 250 - Grey
Visit shop40 offers from £10.81 - £21.21
View price history by clicking the chart icon.
The JRP Riveting Products 4.8 x 10mm Dome Head Sealed Rivets are designed for professionals and serious DIY enthusiasts who require a robust, moisture-resistant fastening solution for metal and rigid materials. Their key benefit lies in the sealed construction, which effectively prevents leaks and corrosion at the rivet point, though they require a compatible rivet gun for proper installation.
| Colour | Silver |
|---|---|
| Model Part Number | 5014196637020 |
| Brand | JRP Riveting Products |
The sealed design provides excellent protection against moisture ingress, making them suitable for most weather-resistant applications.
Use a drill bit slightly larger than 4.8mm for a smooth fit, typically 4.9mm or 5.0mm.
Yes, they can be used on rigid plastics, provided the material thickness is appropriate for the 10mm length.
The grip range is generally suited for material thicknesses up to 10mm combined; ensure your assembly does not exceed this.
No, a standard manual hand-riveter that supports 4.8mm (3/16 inch) rivets will work perfectly.
Rivets are permanent fasteners. Removal typically requires drilling out the head with a bit of the same diameter.
Verify that the hole drilled is not too large and that the rivet gun is pulling the mandrel completely.
Check that the nose piece of the rivet gun is the correct size for a 4.8mm rivet and that the tool is held flush against the material.
Ensure the surface being riveted is flat and free of debris; uneven surfaces prevent the seal from seating correctly.
To install, first drill a hole slightly larger than the 4.8mm diameter of the rivet body. Insert the rivet into the hole and use a standard manual pop-rivet tool to pull the mandrel until it snaps. Maintenance is minimal; however, ensure you store the remaining rivets in a dry, cool environment to prevent pre-installation oxidation. Always verify your material thickness against the 10mm length capacity to ensure the mandrel can properly deform the back-side flange for a secure hold.
