Cuprinol Softwood & Hardwood Furniture Wood Stain - Oak
You can apply this garden furniture stain from the Cuprinol Softwood & hardwood range to , using a...You can apply this garden furniture stain from the Cuprinol Softwood & hardwood range to , using a brush, to colour and provide protection. It takes 2-6 hours to dry and will cover up to 20 m² per litre on average. Cuprinol 5158525 Softwood & Hardwood Garden Furniture Stain Oak750ml Cuprinol Softwood & Hardwood Garden Furniture Stain Oak750ml. The Cuprinol Softwood & Hardwood Furniture Stain creates a lasting water-repellent barrier and weather protection. Suitable for all woods, including hardwood and softwood. It adds a rich colour to softwood and a light tint to hardwood. Coverage Approx. 15m per 750ml. Size 750ml. Cuprinol Softwood & Hardwood Garden Furniture Stain Oak 750ml.
This guide helps users of Cuprinol Softwood & Hardwood Garden Furniture Stain - Oak 750ml achieve the best results in protecting and enhancing their garden furniture. It's ideal for anyone looking to add color and weather protection to their wooden furniture. The stain creates a water-repellent barrier, but remember that the final color can vary based on the wood type and the number of coats applied.
All features
Colour
Brown
Model Part Number
5158525
Brand
Cuprinol
Extended Product Information
FAQs
How much area does one 750ml can cover?
A 750ml can typically covers approximately 15 m².
What is the drying time between coats?
Allow 2-6 hours between coats under normal weather conditions.
Can this stain be used on indoor furniture?
No, this stain is designed for outdoor use only.
Do I need to sand the furniture before applying the stain?
Yes, sand the surface after cleaning to ensure a smooth finish and better adhesion.
How many coats of stain should I apply?
Apply 2-3 coats for optimal protection and color.
What should I do if it rains after I apply the stain?
Avoid applying the stain if rain is likely before the product has dried. If rain occurs shortly after application, allow the surface to dry completely before reapplying.
How should I clean the application tools?
Remove as much stain as possible from the equipment and clean with water.
Troubleshooting
Stain appears uneven or blotchy after application.
Ensure thorough stirring before application. Apply even coats along the grain, avoiding overlaps. Sand the surface lightly between coats if necessary.
Stain is not drying properly.
Check the temperature and humidity levels. Ensure the temperature is above 5 degrees C and that the application area is not damp.
The color is not as expected.
The final color can vary. Apply additional coats to deepen the color and allow a few days for the color to fully develop.
Pros and Cons
Pros
Enhances the natural look of wood with an attractive oak finish.
Provides long-lasting protection against weather and water damage.
Suitable for use on a wide variety of garden furniture materials.
Quick drying time allows for efficient project completion.
Easy to apply with a brush, ensuring even coverage.
Cons
The final color result can vary depending on the wood type.
Requires multiple coats for optimal protection and color depth.
Not suitable for indoor use.
Needs to be applied in temperatures above 5 degrees C.
Setup, Compatibility & Care
Surface Preparation: Before application, remove any dirt, algae, or old coatings by scraping or brushing. Sand the surface for a smooth finish.
Application: Stir the stain thoroughly before use. Apply 2-3 coats evenly along the wood grain using a brush. Avoid overlaps.
Drying Time: Allow 2-6 hours of drying time between coats under normal weather conditions. Wait a few days before heavy use.
Compatibility: This stain is designed for use on both softwood and hardwood garden furniture.
Storage: Store the stain in a cool, dry place and avoid extremes of temperature.