Armstead Trade High Gloss - White - 2.5L

It is suitable for interior and exterior wood, metal, and suitably primed masonry surfaces.

The normal recommendation is to apply one coat of Armstead Trade Undercoat, followed by one or two coats of Armstead Trade High Gloss.

Touch dry: 4-6 hours. Recoat: 16-24 hours, depending on temperature and humidity.

Clean tools with brush cleaner immediately after use.

No, spray application is not recommended for Health and Safety reasons related to all solvent based paints.

Dispose of it responsibly and consider donating it to Community RePaint. Find out more at armsteadtrade.co.uk/pp.

The Volatile organic compounds (VOC) content is 300 g/l.

Ensure adequate ventilation and that the room temperature is within the recommended range. Check for excessive humidity.

Ensure the paint is stirred thoroughly. Apply a second coat if needed, and ensure the undercoat is applied correctly.

Use a high-quality brush and apply thin, even coats. Avoid over-brushing. Ensure the ambient temperature is suitable.

Apply thinner coats and avoid overloading the brush. Ensure the surface is properly prepared.