Dulux Easycare WT Matt Paint - Rock Salt

Yes, Dulux Easycare WT Matt Paint is suitable for interior ceilings as well as walls.

The paint typically dries to the touch within 1-2 hours, but a second coat should not be applied for at least 4 hours. Allow ample time for full curing before heavy cleaning.

While washable, this paint is primarily designed for general interior use. For high-moisture environments like bathrooms or kitchens prone to steam, a specific bathroom paint formulation may be more suitable.

Surfaces must be clean, dry, and free from dust and grease. Fill any imperfections and sand smooth. Gloss surfaces should be lightly sanded, and a primer is recommended.

Use a soft cloth dampened with water. For tougher marks, a mild detergent solution can be used, followed by rinsing with clean water. Avoid abrasive cleaners.

'Rock Salt' is a neutral grey. Undertones can vary slightly depending on lighting conditions, but it is generally a balanced, versatile grey.

Coverage varies depending on the surface and application method, but typically Dulux Easycare WT Matt Paint provides around 12 square meters per liter.

Ensure the surface was properly prepared and primed. Stir the paint thoroughly and apply thin, even coats rather than one thick coat. Check that you are using the correct application tools (brush/roller).

Ensure the stain is water-based. For stubborn marks, try a slightly more concentrated mild detergent solution, but always test in an inconspicuous area first and rinse thoroughly.

Apply paint with consistent pressure and direction. Work in manageable sections, maintaining a wet edge to avoid overlapping dried paint. Use high-quality application tools.

This often indicates insufficient drying time between coats or an uneven application. Allow the paint to fully cure (which can take longer than initial drying) and consider a third thin coat if necessary.