Setup, Compatibility & Care
Setup
- Ensure the surface is clean, dry, and free from loose paint, rust, or grease.
- Shake the can vigorously for at least one minute after the mixing ball rattles.
- Point the nozzle towards the surface and spray in a sweeping motion, holding the can about 8-10 inches away.
- Apply thin, even coats, allowing the recommended drying time between coats.
Compatibility
This paint is compatible with a wide range of surfaces, including wood, metal, plastic, stone, wicker, and various craft materials. Always test on a small, inconspicuous area first to ensure compatibility and desired results.
Care
- Store the can in a cool, dry place away from direct sunlight.
- Clean the nozzle after each use by turning the can upside down and spraying for a few seconds until only propellant comes out.
- If the nozzle clogs, remove it and clean with a solvent-based cleaner.