Draper Air Hose Reel - 20m

The Draper Air Hose Reel comes with a 20-meter (approximately 65 feet) length of hybrid air hose.

Yes, the reel can be mounted on walls or ceilings thanks to the 180-degree swivel mounting bracket, allowing for versatile installation.

Yes, the hybrid air hose is designed to be highly durable and resistant to chemicals, including common workshop oils and greases.

The reel includes all necessary fittings and fixtures required for installation and connection to standard air compressor systems and tools.

The free-stopping mechanism allows you to pull the hose out to any desired length and it will remain in place. Pulling a little further typically disengages the lock for retraction.

The reel casing is made from impact and UV-resistant polypropylene, ensuring durability and protection against environmental factors.

The hose reel typically comes with the hose already spooled, but the mounting bracket may need to be attached, and installation on the wall/ceiling is required.

Check for any kinks, twists, or obstructions around the reel or within the casing. Ensure the hose is not snagged on anything. The internal spring mechanism might need slight adjustment if consistently stiff.

Ensure the hose is extended to a point where the locking mechanism can engage. If the issue persists, there may be debris interfering with the mechanism; inspect and clean the hose entry point.

Check that all fittings are securely tightened. Inspect O-rings or seals for damage and replace if necessary. Use appropriate thread sealant if required for your fittings.

Ensure the mounting screws for the bracket to the wall/ceiling are tight and securely fastened into appropriate wall anchors or studs. Check that the reel is properly seated on the bracket.