Trespass Diane Jacket - Blue - XS

The TPU (Thermoplastic Polyurethane) membrane provides a barrier against water and wind, keeping you dry and protected from the elements, while allowing some moisture vapor to escape.

The jacket has a waterproof rating of 15000mm, which is considered good for protection against heavy rain. Additionally, the taped seams prevent water from entering through the stitching.

The jacket itself provides windproof and water-resistant protection. For cold weather, it is best used as an outer shell with insulating layers underneath, such as fleece or down.

The hood is described as 'Grown On Hood' with 'Zip-Off' functionality, indicating it can be removed by unzipping it.

This is the breathability rating, measured in grams of water vapor that can pass through one square meter of the fabric in a 24-hour period. A higher number indicates better breathability.

Machine wash at 30°C with a mild detergent, avoiding fabric softener and bleach. Tumble dry on low or air dry. Re-proofing may be necessary periodically.

Yes, the jacket features a chest pocket and two lower pockets, all secured with zippers to safely store your essentials.

Ensure seams are fully intact. If the issue persists after washing and re-proofing, the waterproof coating may need to be reapplied using a suitable product.

This could be due to insufficient breathability or moisture from the body. Ensure the jacket is not too tight and consider if a more breathable layer is needed underneath for high-exertion activities.

Clean the zipper teeth with a brush and water. Apply a small amount of wax (like beeswax or a silicone-based zipper lubricant) to the teeth.

Check if the cord lock mechanism is functioning correctly. If it's worn, a replacement cord lock can be purchased from outdoor retailers.