Kingston Technology FURY Beast DDR4 RAM - Black - 32 GB - 3200 MHz

Plug N Play (PnP) automatically configures the RAM to the highest supported speed by the motherboard's BIOS without manual intervention, typically up to DDR4-2666MHz. Intel Extreme Memory Profile (XMP) allows for easy overclocking to higher, manufacturer-rated speeds (e.g., 3200MT/s) by enabling a profile in the BIOS.

No, the Kingston FURY Beast DDR4 RAM is designed for desktop PCs and uses the 288-pin DIMM form factor. Laptops typically use smaller SO-DIMM modules.

To enable XMP, you typically need to restart your computer and enter the BIOS/UEFI setup (often by pressing DEL, F2, or F12 during boot). Look for a memory settings or overclocking section, find the XMP profile option, and select the desired profile (usually Profile 1).

CAS Latency (Column Address Strobe) is the delay between the memory controller telling the memory module to access a specific column in the current row, and the data from that column being available. A lower CL number generally indicates faster performance.

While it's technically possible, mixing RAM modules with different specifications (speed, latency, timings, voltage) can lead to instability or the system defaulting to the slowest module's specifications. It is recommended to use identical kits for optimal performance and stability.

The Kingston FURY Beast DDR4 RAM is backed by a lifetime warranty.

The standard operating voltage for this DDR4 memory is 1.2V.

Ensure the RAM modules are fully seated in the correct slots. Try installing one module at a time to identify a faulty module. Check your motherboard manual for correct slot population for dual-channel mode. Ensure your BIOS is updated to the latest version.

Access your system's BIOS/UEFI settings. Manually enable the Intel XMP profile (version 2.0) or equivalent for your platform. If using Plug N Play, the speed is limited by the motherboard's default settings.

Run a memory diagnostic tool (e.g., Windows Memory Diagnostic or MemTest86). If errors are found, test modules individually. Ensure the RAM voltage is set correctly in the BIOS (typically 1.2V for standard operation).

Reseat the unrecognised module(s). Verify compatibility with your motherboard. Test the module in a different slot or system if possible.