XL Joinery Internal Oak Suffolk 2Xg (Clear Etched Glass) - 2040 X 626 X 40mm

The product description states it is crafted with American white oak and has an engineered construction with a solid core, suggesting a high-quality build that may incorporate solid oak elements along with engineered materials for stability.

Yes, the door is supplied unfinished and can be painted or stained. Ensure you use a primer suitable for wood before painting for best results.

The clear etched glass design allows light through while providing a degree of obscurity, but it is not fully opaque and may offer limited privacy compared to frosted or solid doors.

The product title indicates this specific variant is 2040mm high, 626mm wide, and 40mm thick.

It is generally recommended to trim no more than 3-6mm from each edge, but always check the specific guidelines for this door model. Any trimmed edges must be thoroughly sealed with your chosen finish.

This door features clear etched glass panels, allowing light transmission and a decorative element. The solid counterpart has no glass, offering complete privacy and sound blockage.

No, the door is supplied as the door leaf itself. Hardware such as handles, hinges, and locks will need to be purchased separately.

Check if the door has swollen due to excessive moisture or if it has been trimmed unevenly. Ensure hinges are properly installed and aligned. If trimming was done, ensure the edges were sealed after cutting.

Ensure the oak surface was properly prepared (sanded smooth) before applying the finish. Apply thin, even coats of stain or paint, following the product's instructions. Use a good quality brush or roller suitable for the finish.

Clean the glass with a standard glass cleaner and a soft cloth. Ensure no finishing product has accidentally been applied to the glass surface. If so, carefully remove with a suitable solvent as recommended for the finish used.

Ensure the door was properly acclimatized before finishing and installation. If the door is exposed to extreme humidity fluctuations, it may warp. Ensure all edges, including top and bottom, were sealed with the finish.