Osmo Country Colour - Dove Blue - 5Ml


Best current price£7.53from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.53Visit shop B&Q - Country Colour 2507 Dove Blue5Ml
Visit shop

Best current price£7.53from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.53Visit shop B&Q - Country Colour 2507 Dove Blue5Ml
Visit shop3 offers from £7.53 - £32.48
View price history by clicking the chart icon.
Osmo Country Colour Wood Oil is designed for homeowners and DIY enthusiasts looking to protect and enhance their exterior and interior wood surfaces. Its key benefit is providing durable, long-lasting protection while allowing the natural wood grain to show through, available in a range of shades. A potential consideration is that achieving optimal color saturation may require multiple coats, depending on the wood type and desired outcome.
| Colour | Blue |
|---|---|
| Model Part Number | 2507 |
| Brand | Osmo |
For best results, apply two thin coats. Ensure sufficient drying time between coats.
While Osmo Country Colour Wood Oil provides protection, for kitchen countertops where frequent contact with food and water occurs, Osmo TopOil is generally recommended due to its specific food-safe certification.
The frequency of reapplication depends on the exposure and wear of the wood surface. Typically, recoating may be necessary every few years, often requiring just one maintenance coat.
For items that will be frequently in contact with children, it is advisable to check the specific product certifications or opt for products explicitly designed and certified for children's items.
Yes, the colours can be mixed together to create custom shades. Always test the mixed color on a small, inconspicuous area first.
Drying time is approximately 24 hours, but this can vary depending on temperature, humidity, and ventilation. Ensure the surface is dry to the touch before applying a second coat or placing items on it.
No, this product is designed to penetrate bare or previously oiled wood. Existing finishes like varnish or paint must be completely removed before application.
Ensure the product is applied in thin, even coats and that excess oil is wiped off thoroughly after application. Re-coat if necessary after proper drying time.
This can happen if too much product was applied or if it was not wiped off properly. Lightly sand the affected area and reapply a very thin coat, wiping off any excess.
Ensure adequate ventilation and that the product was applied in a thin layer. High humidity can also slow drying times. Avoid applying a second coat until the first is fully dry to the touch.
Too much oil was applied, or not enough excess was wiped away. Gently wipe the surface with a cloth lightly dampened with the product or mineral spirits to remove sticky residue. Allow to dry thoroughly.
Preparation: Ensure wood surfaces are clean, dry, and free from dust, grease, and old finishes. Lightly sand unfinished wood with a fine-grit sandpaper and remove dust. For previously coated wood, ensure it is clean and sound; if necessary, remove old finishes completely.
Application: Apply thinly and evenly with a brush or roller along the wood grain. For optimal results, apply two thin coats. Allow sufficient drying time between coats (typically 24 hours).
Compatibility: Osmo Country Colour Wood Oil is suitable for most types of timber, including hardwoods and softwoods, for both interior and exterior use. It is not recommended for use on plastic or metal.
Care: Clean surfaces with a damp cloth and mild detergent. For stubborn dirt, use Osmo Wood Cleaner. Re-application may be needed every few years, depending on exposure and wear, typically requiring just one coat of the product.