Rustins Quick Dry Outdoor Wood Stain - Satin - Ebony 250ml

Apply at least two coats for optimal protection and colour depth.

Clean brushes with water immediately after use.

Yes, this stain can be used as a sealer for concrete.

The stain is touch dry in 30 minutes and recoatable in 4 hours.

It is suitable for exterior joinery, doors, windows, garden furniture, conservatories, and can be used on hard and softwood.

Coverage is 12-15m² per litre per coat, depending on the absorbency of the surface.

Yes, the stain is designed to be low odour during application.

Ensure the surface is clean and free from previous coatings. Check the temperature and humidity; drying may be affected by extreme conditions. Ensure adequate ventilation.

Ensure the stain is thoroughly mixed. Apply an even coat and apply the same number of coats across the entire surface. Wood absorbency can affect the final colour.

The surface was not properly prepared. Ensure the surface is clean and sanded. Remove the existing finish and reapply the stain following the preparation guidelines.