Best current price£97.39from The Range
Shopping.co.uk recommended and popular offers
The Range£97.39Visit shop Jcp Fixings Eta Option 1 Heavy Duty Anchors Countersunk Head Bright Zinc Plated Ce - 15Mm/M10 X 100 (Box Of 25) - Red
Visit shop20 offers from £97.39 - £166.77
View price history by clicking the chart icon.
The JCP Fixings ETA Option 1 Heavy Duty Anchors are designed for construction professionals and DIY enthusiasts requiring reliable, high-load fastening in solid substrates like concrete and masonry. These anchors offer the critical benefit of an ETA-certified structural hold, providing peace of mind for demanding load-bearing applications. However, users should note that the countersunk head design requires precise drilling to ensure the anchor sits flush with the surface for a clean, professional finish.
| Colour | Red |
|---|---|
| Model Part Number | 5014196023229 |
| Brand | JCP Fixings |
ETA Option 1 indicates that the anchor has been tested and approved for use in both cracked and non-cracked concrete, meeting the highest level of European safety standards.
These anchors are designed for solid concrete and dense masonry. They are not recommended for hollow blocks as they require a solid substrate to expand correctly.
The bright zinc-plated finish is intended for internal or protected external use. For constant exposure to moisture or salt, stainless steel alternatives are recommended.
No special installation tool is required; a standard torque wrench or manual spanner is sufficient to achieve the required tension.
No, these are permanent fasteners. Once they have been torqued and the expansion sleeve has engaged, they should not be removed and reused.
The hole may be drilled too large; ensure you are using the correct drill bit diameter according to the product specifications.
Check that the hole depth is sufficient and that all dust has been fully cleared from the bottom of the bore.
Ensure the hole is clear of debris and that the anchor is not being forced into a hole that is slightly undersized.
To install, first drill a hole into the base material at the required diameter and depth. Clean the debris from the hole using a dust blower or brush to ensure maximum contact between the anchor expansion sleeve and the masonry. Insert the anchor and tighten until the countersunk head is flush with the fixture. While the zinc-plated finish is resistant to corrosion, avoid using these in direct exposure to harsh weather or acidic environments without additional protective coatings. Always store the anchors in a dry environment to prevent premature oxidation of the zinc plating before installation.
