Vitopod Electric Propagator - Large

The large Vitopod Electric Propagator has a power consumption of 100W.

The Vitopod is designed for indoor use in a controlled environment. It should not be exposed to rain or extreme outdoor weather conditions.

Clean the propagator with a damp cloth and a mild, non-abrasive detergent. Rinse and wipe dry. Ensure electrical components remain dry.

The digital thermostat allows for precise temperature adjustments between 5°C and 30°C.

Optional height extension kits are available separately. These add 15cm per layer and can be stacked up to 11 layers high.

Yes, optional LED growing light systems can be purchased and installed. They can be placed parallel to each other with a maximum spacing of 23cm.

It is constructed from recycled, UV-resistant acrylic.

Check that the power cable is securely connected at both ends and the unit is plugged into a working outlet. Verify the thermostat is set to a temperature higher than the current soil temperature.

Ensure the propagator lid is properly sealed. Check that the temperature is not set too high for the ambient room conditions, which can cause the unit to cycle more frequently. Confirm the soil probe is making good contact with the soil.

Increase ventilation by opening the adjustable vents more to allow humidity to escape. Reduce watering if the soil is excessively wet.

The Vitopod is constructed from UV-resistant acrylic, which should prevent significant yellowing. If discoloration occurs, ensure it is not due to external staining or dirt. Clean with a mild detergent.