Best current price£8.17from The Range
Shopping.co.uk recommended and popular offers
The Range£8.17Visit shop Jrp Riveting Products 5.0 X 20Mm Aluminium/Steel Dome Head Rivets - Jrpasd5020 - Box Of 250 - Grey
Visit shop32 offers from £8.17 - £16.64
View price history by clicking the chart icon.
The JRP Riveting Products 2.4 x 10mm Dome Head Rivets are designed for DIY enthusiasts and professionals seeking a reliable solution for permanent metal-to-metal fastening. These rivets offer excellent structural strength and a clean, aesthetic finish thanks to their low-profile dome head design, making them ideal for light-duty fabrication. Note that these are specialized 2.4mm fasteners, so ensure your riveting tool is calibrated for this specific diameter before beginning your project.
| Colour | Grey |
|---|---|
| Model Part Number | JRPASD2410 |
| Brand | JRP Riveting Products |
You should use a 2.4mm drill bit to create the appropriate hole size for the rivet shank.
These are 10mm length rivets; ensure your total material thickness is within the capacity of the rivet grip range.
While durable, standard rivets should be used in dry conditions unless they are specified as stainless steel for high-corrosion environments.
No, they are compatible with any standard manual or pneumatic pop riveting tool.
Rivets create a permanent joint. Removal typically requires drilling out the rivet head with a metal drill bit.
Ensure your riveting tool is fully closed and that the nosepiece is correctly sized for a 2.4mm rivet.
Verify the pilot hole is not too large; a 2.4mm drill bit should be used for a snug fit.
To install these rivets, align your components and drill a 2.4mm pilot hole through both pieces of material. Insert the rivet into the hole and use a standard manual hand-riveter or pneumatic riveter to draw the mandrel through until it snaps. No special maintenance is required, though storing the rivets in a dry, low-humidity environment will prevent potential surface oxidation. Verify that your tool's nosepiece matches the 2.4mm specification to ensure a smooth, clean break of the mandrel.
